Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 256GB 16x16GB DDR4 2933 CL21 ECC RDIMM Dell Precision 7920

SKU CH-SNJV-DK8TJ

256 GB DDR4 ECC registered memory kit with 16 modules at 2933 MHz CL21 for Dell Precision 7920 workstations

  • Capacity256GB (16 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 256 GB total capacity from 16 matched 16 GB modules
  • ECC registered design detects and corrects single-bit errors
  • 2933 MHz DDR4 speed rated at PC4-23400 bandwidth
  • Low 1.2 V operation reduces power draw and heat
  • Validated for Dell Precision 7920 rack and tower workstations

Dell Precision 7920 memory kit

This 256GB kit contains sixteen 16GB DDR4 2933 RDIMM modules built for the Dell Precision 7920 rack or tower workstation. It is intended for administrators expanding memory capacity in supported Dell systems.

Registered ECC DDR4 2933

Each module runs at 1.2V with CL21 latency and a 2Rx8 organisation, providing registered ECC operation required by the Precision 7920 platform. The registered buffer and error correction are the decisive specifications for compatibility.

Tool-free DIMM installation

Modules insert into the 288-pin DDR4 slots after opening the chassis; the workstation firmware recognises the kit automatically when all sixteen slots are populated. Common issues arise if slots are filled in the wrong sequence or if mixed-rank modules are combined with this kit.

Přednosti

  • 256 GB total capacity from 16 matched 16 GB modules
  • ECC registered design detects and corrects single-bit errors
  • 2933 MHz DDR4 speed rated at PC4-23400 bandwidth
  • Low 1.2 V operation reduces power draw and heat
  • Validated for Dell Precision 7920 rack and tower workstations

Specifikace

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K16
Capacity256GB (16 x 16GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (16X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

What does the 2933 MT/s speed mean when the kit is installed in a Dell Precision 7920?

The modules run at DDR4 2933 (PC4-23400) with CL21 latency, delivering the rated throughput once the workstation's memory controller is configured for that speed.

How does the ECC RDIMM interface affect usable capacity and bandwidth in this system?

Registered DIMMs with ECC add a clock cycle for buffering and provide single-bit error correction, so the full 256 GB is addressable with data integrity protection.

What physical slot and voltage requirements must the Precision 7920 meet for these 288-pin modules?

The workstation needs 16 free DDR4 RDIMM slots operating at 1.2 V to accept the 16 x 16 GB kit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.