Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 UDIMM sticks in a row

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR5 5600 CL42 ECC UDIMM

SKU CH-JNH1-80EM5

Eight-module kit provides 256 GB of DDR5 ECC unbuffered memory at 5600 MT/s with CL42 latency and 1.1 V operation

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCYes

Capacity 256GB (8 x 32GB)

Rank 2Rx8

  • 256 GB total capacity from eight 32 GB modules
  • DDR5 5600 speed with CL42 latency for server workloads
  • ECC protection detects and corrects single-bit errors
  • 1 V operation lowers power draw in dense configurations
  • 2Rx8 unbuffered UDIMM design fits standard 288-pin DDR5 slots

High-density DDR5 ECC kit

This NEMIX RAM kit delivers 256GB of DDR5 memory across eight 32GB unbuffered UDIMM modules. Each stick runs at 5600 MT/s with CL42 latency at 1.1V and includes on-die ECC for data integrity. The 2Rx8 organisation suits platforms that support high-capacity unregistered memory.

Suited for memory-intensive workstations

Builders populating servers or workstations that accept 288-pin DDR5 ECC UDIMMs will find the density and error correction useful for virtualisation, large datasets or ZFS caches. Systems limited to registered DIMMs, lower maximum capacity per slot, or non-ECC consumer boards cannot use this kit.

Fits eight UDIMM slots on DDR5 platforms

The modules require a motherboard with eight 288-pin DDR5 slots that support unbuffered ECC operation at 5600 MT/s. No heat spreaders are fitted, leaving clearance for tall CPU coolers. The 1.1V default voltage keeps power draw modest for dense configurations.

Přednosti

  • 256 GB total capacity from eight 32 GB modules
  • DDR5 5600 speed with CL42 latency for server workloads
  • ECC protection detects and corrects single-bit errors
  • 1 V operation lowers power draw in dense configurations
  • 2Rx8 unbuffered UDIMM design fits standard 288-pin DDR5 slots

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM
Part NumberME44800-328K8X
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL42
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does my motherboard need 288-pin DDR5 slots to use this kit?

Yes, this kit uses 288-pin DDR5 ECC UDIMM modules that require a motherboard with DDR5 slots supporting ECC unbuffered memory.

Can I mix these 5600 CL42 modules with slower DDR5 ECC UDIMMs I already have?

The system will run all modules at the speed and timings of the slowest installed kit, so mixing with slower DDR5 ECC UDIMMs is possible but reduces overall performance.

How can I verify the kit is running at 5600 MT/s with CL42 after installation?

Check the memory speed and CAS latency in your BIOS/UEFI or use a system information tool such as CPU-Z to confirm 5600 MT/s and CL42 timings.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.