Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2666 CL19 UDIMM memory upgrade

SKU CH-5XV1-CQ4RE

Four 8 GB DDR4 2666 CL19 UDIMM modules totalling 32 GB, validated for Supermicro workstation motherboards

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB total capacity in a four-module kit
  • DDR4 2666 speed rated at PC4-21300
  • CL19 latency for responsive operation
  • 20V low-voltage DDR4 efficiency
  • 288-pin UDIMM form factor fits desktop DIMM slots

32GB DDR4 kit for Supermicro workstations

This 32GB kit contains four 8GB DDR4 2666 modules built for Supermicro desktop and SuperWorkstation motherboards such as the MBD-C9Z390-CG. The unbuffered non-ECC UDIMMs run at 1.2V with CL19 latency. It is suited for professionals who need a straightforward capacity increase on a validated platform.

Verify DDR4 UDIMM slots and 2666 support

Before ordering, confirm the board accepts 288-pin DDR4 UDIMM modules and can run memory at 2666 MT/s. Check that four slots are free for the 4x8GB configuration and that the system does not require registered or ECC memory. The modules use major OEM chips from Samsung, Micron or Hynix.

Standard voltage and no spreaders for quiet

At 1.2V the kit draws standard DDR4 power without extra cooling hardware. The absence of heat spreaders keeps the modules low-profile and silent, relying on case airflow alone. Under normal workloads the memory operates within JEDEC limits, adding minimal thermal load to the chassis.

Přednosti

  • 32GB total capacity in a four-module kit
  • DDR4 2666 speed rated at PC4-21300
  • CL19 latency for responsive operation
  • 20V low-voltage DDR4 efficiency
  • 288-pin UDIMM form factor fits desktop DIMM slots

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT

Otázky k tomuto produktu

Does the kit include four 8 GB DDR4 modules or must I purchase them individually?

The kit ships with four 8 GB DDR4 2666 CL19 288‑pin UDIMM modules for a total of 32 GB; no extra modules are needed.

Should I choose the 32 GB 2666 CL19 kit or a different capacity for a SuperMicro C9Z390‑CG board?

This 32 GB kit matches the board’s supported DDR4 2666 speed and 1.20 V voltage, so it is the correct capacity for four-slot population.

What does the PC4‑21300 rating mean when the modules are installed in my workstation?

PC4‑21300 indicates a peak transfer rate of 21 300 MB/s at 2666 MT/s, which the system will use at the rated CL19 latency.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.