Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular DDR4 RDIMM module with black chips, no heat spreader, gold edge connector visible

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz CL21 2Rx4 ECC RDIMM SuperMicro memory upgrade

SKU CH-05Z0-C0FQQ

A 32 GB DDR4 2933 MHz ECC registered DIMM built for SuperMicro servers and workstations

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity supports larger workloads
  • DDR4 2933 MHz speed matches server specs
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank layout maximises density
  • 2 V operation reduces power draw

32GB DDR4-2933 ECC RDIMM for Supermicro servers

This 32GB registered DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It uses a 2Rx4 organisation and 288-pin form factor for Supermicro platforms requiring ECC registered memory. The single-module kit adds capacity without occupying additional DIMM slots.

Sustained load behaviour with registered ECC

Registered buffering reduces electrical load on the memory controller during continuous operation. ECC corrects single-bit errors and detects multi-bit errors to maintain data integrity under prolonged workloads. The 1.20V standard voltage keeps power draw predictable during extended server duty cycles.

Compatibility checks before ordering

Verify the motherboard supports DDR4-2933 registered ECC RDIMMs and accepts 2Rx4 32GB modules. Confirm available 288-pin DIMM slots and maximum capacity per channel in the system documentation. Ensure the platform does not require unbuffered or load-reduced memory types.

Přednosti

  • 32 GB capacity supports larger workloads
  • DDR4 2933 MHz speed matches server specs
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank layout maximises density
  • 2 V operation reduces power draw

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-324K1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

Does this 1.2V DDR4 2933MHz RDIMM run hot or draw extra power when the server runs 24/7?

The module operates at the standard 1.2V DDR4 voltage with no heat spreader, so thermal output and power draw stay within normal JEDEC limits for continuous server workloads.

What must my Supermicro motherboard already support for this 288‑pin ECC registered DIMM to function?

The board needs DDR4 RDIMM slots that accept 2Rx4 registered ECC modules at 2933MHz and a BIOS that enables ECC operation.

How does this CL21 2Rx4 module behave when paired with slower DDR4 RDIMMs already installed in the same system?

The memory controller will down‑clock all populated channels to the lowest common speed and tightest shared timings, so the new 32GB stick runs at the older modules' rate.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.