Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green bare circuit board DDR4 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz CL21 ECC RDIMM Dell PowerEdge R940

SKU CH-S70S-27SK0

32GB DDR4 2933MHz ECC registered RDIMM with CL21 latency for Dell PowerEdge R940 servers

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in Dell PowerEdge R940 servers
  • Registered DDR4 2933 MT/s speed feeds high-throughput workloads
  • 32 GB single-module capacity scales memory without extra slots
  • 20 V low-voltage operation reduces server power draw
  • 2Rx4 288-pin RDIMM layout fits Dell R940 memory architecture

Dell PowerEdge R940 memory upgrade

This 32 GB DDR4 module is built for the Dell PowerEdge R940 server platform. It delivers registered ECC operation at 2933 MHz for workloads that demand data integrity and high capacity. System administrators expanding memory in a compatible R940 chassis can install this single DIMM to increase total system memory.

Registered ECC DDR4 platform limits

The RDIMM form factor requires a motherboard that supports registered, error-correcting memory and a 288-pin DDR4 slot. Mixing registered and unbuffered modules is not supported, and the platform must accept 2Rx4 organisation at 1.2 V. Maximum capacity per slot and total system capacity are defined by the server specifications.

CL21 latency at 2933 MHz

CAS latency of 21 cycles at the rated 2933 MHz speed determines the timing profile for this module. Buyers needing lower latency or higher frequency should verify the server memory configuration rules before purchasing. Systems locked to slower bus speeds will downclock this DIMM automatically.

Přednosti

  • ECC protection guards data integrity in Dell PowerEdge R940 servers
  • Registered DDR4 2933 MT/s speed feeds high-throughput workloads
  • 32 GB single-module capacity scales memory without extra slots
  • 20 V low-voltage operation reduces server power draw
  • 2Rx4 288-pin RDIMM layout fits Dell R940 memory architecture

Specifikace

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-324K1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

Is the 32GB single module the right choice for expanding a Dell PowerEdge R940?

Yes, this 32GB 2Rx4 RDIMM is built for the PowerEdge R940 and installs as a single stick.

What does the 2933MHz rating deliver inside a running server?

The module runs at DDR4 2933 with CL21 latency, providing the rated throughput when the platform enables that speed.

How does the 288-pin DDR4 RDIMM interface limit performance?

The registered 288-pin DDR4 slot caps bandwidth to PC4-23400 and requires ECC registered memory, which this module supplies.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.