Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz CL21 ECC RDIMM HPE P28225-B21 memory upgrade

SKU CH-HFHT-3J9HX

32 GB DDR4 2933 MHz ECC registered DIMM with CL21 latency and 1.2 V operation for compatible HPE servers

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB capacity expands server memory headroom
  • DDR4 2933MHz speed supports high-throughput workloads
  • ECC registered design protects data integrity
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits HPE P28225-B21 systems

HPE Server ECC RDIMM Upgrade

This 32GB DDR4 2933MHz CL21 registered DIMM is built for HPE systems requiring ECC error correction. It targets IT administrators expanding memory in compatible HPE servers and workstations where data integrity and stability are mandatory. Buyers needing unbuffered UDIMM modules or non-ECC memory for consumer platforms cannot use this product.

Thermals Power and Noise

The module operates at a standard 1.2V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering and ECC logic add minimal power draw over unbuffered equivalents. No moving parts are present so the module itself produces no audible noise in normal operation.

Included Module Only

The package contains a single 32GB 288-pin RDIMM tested for compatibility with HPE part number P28225-B21. No additional brackets, cables or software utilities are bundled. Installation follows the server manufacturer’s documented memory population rules.

Přednosti

  • 32GB capacity expands server memory headroom
  • DDR4 2933MHz speed supports high-throughput workloads
  • ECC registered design protects data integrity
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits HPE P28225-B21 systems

Specifikace

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-324K1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

How do I install this 288-pin DDR4 RDIMM in an HPE server, and which step is often missed?

Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 2933 MHz speed and ECC registered mode are detected.

What maintenance or replacement will this 32 GB ECC RDIMM need over time?

No scheduled maintenance is required; ECC corrects single-bit errors on the fly, and the module should only be replaced if the server logs uncorrectable memory errors or a DIMM failure alert.

What limit appears first when this CL21 1.2 V module runs sustained workloads?

The CAS latency of 21 cycles at 2933 MHz sets the access timing ceiling, so sustained throughput is bounded by that latency figure rather than the 1.2 V power envelope.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.