Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black chips, gold edge contacts, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 2Rx8 ECC RDIMM memory upgrade

SKU CH-1HHY-QWFM6

32 GB DDR5 ECC registered DIMM running at 5600 MT/s with CL46 latency for Hynix-compatible servers

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data errors in critical workloads
  • 5600 MT/s DDR5 speed handles demanding server applications
  • Registered design stabilises signal integrity on multi-module systems
  • 1 V operation reduces power draw per module
  • 2Rx8 32 GB density maximises capacity per slot

Server RDIMM upgrade for ECC workloads

This 32GB DDR5 5600 module is built for registered server and workstation platforms that require error-correcting memory. The single 2Rx8 stick runs at 1.1V with CL46 latency and fits 288-pin DDR5 slots. It targets administrators expanding capacity in compatible Hynix-based systems.

Replaces non-ECC or slower registered DIMMs

The jump is worth it when your board demands registered ECC DDR5 at 5600 MT/s and you need the 32GB density per slot. Systems that currently run lower-speed registered modules or lack error correction gain data integrity and throughput aligned to the PC5-44800 standard. Boards limited to unbuffered memory or a different DDR generation cannot use this module.

DDR5 RDIMM interface defines the practical limits

The 288-pin registered form factor requires a motherboard with a registered DDR5 memory controller and matching BIOS support. Bandwidth is capped by the DDR5 5600 specification and the CL46 timing. Mixing ranks, speeds or voltages outside the 1.1V 2Rx8 profile may prevent boot or force downclocking.

Přednosti

  • ECC protection prevents data errors in critical workloads
  • 5600 MT/s DDR5 speed handles demanding server applications
  • Registered design stabilises signal integrity on multi-module systems
  • 1 V operation reduces power draw per module
  • 2Rx8 32 GB density maximises capacity per slot

Specifikace

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR5 5600MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHynix
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

Will the 288‑pin DDR5 RDIMM fit a standard server DIMM slot?

Yes, the module uses the 288‑pin DDR5 RDIMM form factor that matches registered server memory slots.

What BIOS setting is often missed when installing this ECC registered module?

Enable ECC and registered‑memory support in the BIOS before booting; otherwise the system may not recognise the module.

Does the 1.10 V 2Rx8 module need active cooling over its lifetime?

No heat spreader is fitted; normal server chassis airflow is sufficient for the 1.10 V 2Rx8 DRAM.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.