Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 384GB (8x48GB) DDR5 5600 ECC RDIMM CL46 2Rx8 1.1V 288-pin memory upgrade for GIGABYTE MZ33-AR1

SKU CH-A36Q-WNS8K

384 GB DDR5-5600 registered ECC kit with eight 48 GB modules, CL46 at 1.1 V, validated for the GIGABYTE MZ33-AR1 motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity across eight 48 GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated bandwidth for compute workloads
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation at 2Rx8 rank matches the motherboard memory controller specification
  • 288-pin RDIMM form factor verified for GIGABYTE MZ33-AR1 slot and population rules

384 GB DDR5 5600 ECC RDIMM kit for GIGABYTE MZ33-AR1

This NEMIX RAM kit delivers 384 GB across eight 48 GB modules rated DDR5 5600 (PC5-44800) with CL46 latency, 1.10 V operation and 2Rx8 registered ECC. The 288-pin RDIMM form factor matches the memory controller requirements of the GIGABYTE MZ33-AR1 motherboard for full-capacity recognition at rated speed.

Who this suits and who it does not

Suits administrators populating all eight slots of a GIGABYTE MZ33-AR1 with registered ECC memory for maximum supported capacity. Not for systems that require unbuffered UDIMM or SODIMM modules, nor for builds needing a lower total capacity or a different pin count.

Registered ECC 2Rx8 architecture at 1.10 V

Registered buffering offloads the memory controller so every slot runs fully populated, while ECC corrects single-bit errors on the fly to prevent silent data corruption. The 2Rx8 organisation and 1.10 V voltage are the exact electrical parameters the board expects for stable operation.

Přednosti

  • 384 GB total capacity across eight 48 GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated bandwidth for compute workloads
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation at 2Rx8 rank matches the motherboard memory controller specification
  • 288-pin RDIMM form factor verified for GIGABYTE MZ33-AR1 slot and population rules

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the GIGABYTE MZ33-AR1 motherboard need all eight DIMM slots filled for this 384 GB kit to run at 5600 MT/s?

The kit is spec-matched to the board's DDR5 5600 population rules; the manual shows the required slot order so every 48 GB module operates at its rated 5600 MT/s, CL46, 1.1 V timing.

My existing RDIMMs are PC5-44800 CL46 2Rx8 like this kit; will they interleave cleanly on the MZ33-AR1?

Matching speed, voltage, rank and ECC type lets the memory controller treat all modules as one pool, but the board manual must confirm the exact population sequence for mixed-capacity DIMMs.

After installing the eight 48 GB modules, how can I verify the system sees the full 384 GB at DDR5 5600 with ECC active?

POST memory test and BIOS memory-info screen will show 384 GB detected, 5600 MT/s data rate, CL46 latency, 1.1 V and ECC enabled; OS tools such as dmidecode or lshw can confirm the same values.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.