Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six green DDR4 UDIMM sticks in a row

NEMIX RAM

NEMIX RAM 48GB (6x8GB) DDR4 3200 CL22 UDIMM memory upgrade

SKU CH-KHN9-7VX7B

48 GB DDR4-3200 CL22 UDIMM kit in six 8 GB modules at 1.2 V for Thinkmate XF6-14X1 workstations

  • Capacity48GB (6 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 48GB kit expands workstation capacity with six 8GB modules
  • DDR4 3200 speed transfers data at PC4-25600 bandwidth
  • CL22 latency and 1.20V voltage balance responsiveness with efficiency
  • 288-pin UDIMM form factor fits Thinkmate XF6-14X1 workstations
  • Major-brand Samsung Micron Hynix chips validated under load for stability

Capacity and configuration

This NEMIX RAM kit provides 48GB of DDR4 memory across six 8GB UDIMM modules. It runs at 3200MT/s with a CAS latency of CL22 and operates at the standard 1.20V. The unbuffered, non-ECC design uses 288-pin 1Rx8 chips from major OEM suppliers and includes no heat spreaders.

ThinkMate workstation upgrades

The kit is validated for the ThinkMate XF6-14X1 workstation, making it a direct fit for IT teams maintaining that platform. Builders needing ECC error correction, registered modules, or a different module count should look elsewhere.

Speed grade decides fit

The memory is rated at DDR4 3200 (PC4-25600) with CL22 timing; if the target system requires a different speed bin or lower latency, this kit will not meet that requirement.

Přednosti

  • 48GB kit expands workstation capacity with six 8GB modules
  • DDR4 3200 speed transfers data at PC4-25600 bandwidth
  • CL22 latency and 1.20V voltage balance responsiveness with efficiency
  • 288-pin UDIMM form factor fits Thinkmate XF6-14X1 workstations
  • Major-brand Samsung Micron Hynix chips validated under load for stability

Specifikace

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K6
Capacity48GB (6 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB (6X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Otázky k tomuto produktu

How many 288-pin DDR4 UDIMM slots does the THINKMATE XF6-14X1 need free for this 6x8GB kit?

The kit contains six 8GB modules, so six free 288-pin DDR4 UDIMM slots are required on the workstation motherboard.

Which way round do the 1Rx8 modules go in, and what is the common mistake?

Align the notch on each 288-pin UDIMM with the slot key; the common mistake is forcing a module in backwards, which can damage the socket.

Will the Samsung, Micron or Hynix chips on these CL22 modules need active cooling later?

The modules ship without heat spreaders and run at 1.20V; under normal chassis airflow no extra cooling is required for the DRAM chips.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.