Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 48GB DDR5 6400MHz CL52 2Rx8 1.1V ECC RDIMM MZ33-CP1 memory upgrade

SKU CH-C6N7-AH7G3

48 GB DDR5 6400 MHz CL52 2Rx8 ECC registered RDIMM for GIGABYTE MZ33-CP1 servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 48GB

Zobrazit dalších 24 konfigurací
  • 48GB DDR5-6400 capacity lets your server address large workloads at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors for enterprise stability
  • CL52 latency at 1.1V delivers the exact timing and voltage the platform expects
  • 288-pin RDIMM form factor matches the GIGABYTE MZ33-CP1 slot and population rules
  • Built with major OEM Samsung, Micron or Hynix chips for consistent server-grade reliability

48GB DDR5 RDIMM for GIGABYTE MZ33-CP1

This 48GB DDR5 registered ECC module is built for the GIGABYTE MZ33-CP1 motherboard. It targets server and workstation builders who need validated, full-capacity memory that the platform recognises at its rated speed.

DDR5 RDIMM platform constraints

DDR5 registered DIMMs require a motherboard wired for the 288-pin RDIMM pinout and a memory controller that supports registered operation and on-die ECC. A board designed for unbuffered UDIMMs or SODIMMs will not accept this module, and population rules in the system manual dictate how many slots can be filled at once.

CL52 at 6400MHz decides fit

The module runs at DDR5 6400 (PC5-51200) with a CAS latency of 52 and a 1.1V operating voltage. If the motherboard memory controller cannot train at that exact speed, rank configuration and timing, the DIMM will not operate at its rated specification.

Přednosti

  • 48GB DDR5-6400 capacity lets your server address large workloads at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors for enterprise stability
  • CL52 latency at 1.1V delivers the exact timing and voltage the platform expects
  • 288-pin RDIMM form factor matches the GIGABYTE MZ33-CP1 slot and population rules
  • Built with major OEM Samsung, Micron or Hynix chips for consistent server-grade reliability

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 48GB 2Rx8 DDR5-6400 CL52 module or a different capacity for my GIGABYTE MZ33-CP1?

The 48GB 2Rx8 DDR5-6400 CL52 RDIMM is the exact-match upgrade for the GIGABYTE MZ33-CP1. Using this capacity and rank lets the memory controller recognise the full 48GB and run at the rated 6400MT/s without down-clocking.

What does the 6400MHz speed mean once the module is installed in the server?

The module runs at DDR5-6400 (PC5-51200) with CL52 latency at 1.1V. Registered buffering offloads the controller so every populated slot sustains that data rate, while ECC corrects single-bit errors on the fly.

How does the 288-pin RDIMM interface and registered ECC design cap real-world performance?

The 288-pin RDIMM form factor fits only RDIMM slots. Registered architecture lets the board run fully populated at 6400MT/s, and ECC adds single-bit error correction without reducing the rated throughput.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.