BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278589BTC
Skladem
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX PS-3515Q memory upgrade
4GB DDR3 1333MHz SODIMM upgrades POSIFLEX PS-3515Q terminals with 1.35V low-voltage operation
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3515Q terminals
- DDR3 1333 speed boosts transaction processing
- Low 1.35V voltage reduces system heat
- 2Rx8 dual-rank layout maximises 4GB capacity
- 204-pin SODIMM fits kiosk motherboards directly
NEMIX RAM 4GB DDR3 POS Module
This NEMIX RAM 4GB DDR3 1333MHz PC3-10600 SODIMM is built for the POSIFLEX PS-3515Q fanless point-of-sale terminal. It runs at 1.35V low voltage with CL9 latency and a 2Rx8 rank configuration. The 204-pin unbuffered non-ECC module uses major OEM chips from Samsung, Micron or Hynix. It installs in minutes to boost terminal responsiveness.
Suits POSIFLEX PS-3515Q upgrades
This module fits the POSIFLEX PS-3515Q terminal when a single 4GB DDR3 SODIMM is required. Builders needing ECC error correction, registered buffering, higher capacity than 4GB, or a different voltage such as 1.50V should look at other parts. Systems using DDR5 or other form factors cannot accept this memory.
DDR3 1333MHz PC3-10600 speed decides fit
The memory operates at DDR3 1333MHz rated as PC3-10600 with CL9 timing. This exact speed grade must match the terminal's memory controller specification for stable operation. A different DDR3 speed or a DDR5 module will not work in the PS-3515Q. Verify the platform requires PC3-10600 before purchase.
Přednosti
- Designed for POSIFLEX PS-3515Q terminals
- DDR3 1333 speed boosts transaction processing
- Low 1.35V voltage reduces system heat
- 2Rx8 dual-rank layout maximises 4GB capacity
- 204-pin SODIMM fits kiosk motherboards directly
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Otázky k tomuto produktu
Should I choose the 4GB module or look for a different capacity?
This listing is for a single 4GB stick (part MS10600-428K1). If your POSIFLEX PS-3515Q has one free SODIMM slot, this adds 4GB. If you need more total memory, you would need to buy additional modules of the same specification.
What does the 1333 MHz rating mean once the module is installed?
The module runs at DDR3 1333 (PC3-10600) with CL9 latency at 1.50 V. The POSIFLEX PS-3515Q memory controller will operate it at that speed; it will not run faster than 1333 MHz.
Does the 204-pin SODIMM interface limit the memory speed in practice?
The 204-pin DDR3 SODIMM form factor is keyed for DDR3 only. The module is rated for 1333 MHz and the system will run it at that speed.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
