我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 204-pin DDR3 SODIMM module with black chips

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX PS-3515Q memory upgrade

SKU CH-02MG-R3A48

4GB DDR3 1333MHz SODIMM upgrades POSIFLEX PS-3515Q terminals with 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3515Q terminals
  • DDR3 1333 speed boosts transaction processing
  • Low 1.35V voltage reduces system heat
  • 2Rx8 dual-rank layout maximises 4GB capacity
  • 204-pin SODIMM fits kiosk motherboards directly

NEMIX RAM 4GB DDR3 POS Module

This NEMIX RAM 4GB DDR3 1333MHz PC3-10600 SODIMM is built for the POSIFLEX PS-3515Q fanless point-of-sale terminal. It runs at 1.35V low voltage with CL9 latency and a 2Rx8 rank configuration. The 204-pin unbuffered non-ECC module uses major OEM chips from Samsung, Micron or Hynix. It installs in minutes to boost terminal responsiveness.

Suits POSIFLEX PS-3515Q upgrades

This module fits the POSIFLEX PS-3515Q terminal when a single 4GB DDR3 SODIMM is required. Builders needing ECC error correction, registered buffering, higher capacity than 4GB, or a different voltage such as 1.50V should look at other parts. Systems using DDR5 or other form factors cannot accept this memory.

DDR3 1333MHz PC3-10600 speed decides fit

The memory operates at DDR3 1333MHz rated as PC3-10600 with CL9 timing. This exact speed grade must match the terminal's memory controller specification for stable operation. A different DDR3 speed or a DDR5 module will not work in the PS-3515Q. Verify the platform requires PC3-10600 before purchase.

商品特色

  • Designed for POSIFLEX PS-3515Q terminals
  • DDR3 1333 speed boosts transaction processing
  • Low 1.35V voltage reduces system heat
  • 2Rx8 dual-rank layout maximises 4GB capacity
  • 204-pin SODIMM fits kiosk motherboards directly

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

商品問答

Should I choose the 4GB module or look for a different capacity?

This listing is for a single 4GB stick (part MS10600-428K1). If your POSIFLEX PS-3515Q has one free SODIMM slot, this adds 4GB. If you need more total memory, you would need to buy additional modules of the same specification.

What does the 1333 MHz rating mean once the module is installed?

The module runs at DDR3 1333 (PC3-10600) with CL9 latency at 1.50 V. The POSIFLEX PS-3515Q memory controller will operate it at that speed; it will not run faster than 1333 MHz.

Does the 204-pin SODIMM interface limit the memory speed in practice?

The 204-pin DDR3 SODIMM form factor is keyed for DDR3 only. The module is rated for 1333 MHz and the system will run it at that speed.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。