Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular SODIMM module with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 SODIMM POSIFLEX EK-1530

SKU CH-SFMD-E04ZQ

4GB DDR3 1333 SODIMM for POSIFLEX EK-1530 kiosks, 204-pin non-ECC unbuffered module tested for point-of-sale stability

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Built for POSIFLEX EK-1530 kiosks
  • DDR3 1333 speed for responsive operation
  • Non-ECC unbuffered design matches system specs
  • 35 V low-voltage module reduces heat
  • 204-pin SODIMM form factor fits the slot

POSIFLEX EK-1530 POS memory upgrade

This 4 GB DDR3 SODIMM is built specifically for the POSIFLEX EK-1530 Mercury Series kiosk. It provides a direct replacement or capacity increase for point-of-sale terminals that require 204-pin DDR3 1333 modules. The module targets IT teams maintaining these specific kiosk systems in retail or hospitality environments.

Single module simplifies slot management

The package contains one 4 GB stick organised as 2Rx8, so it occupies a single SODIMM slot. This leaves any second slot free for future expansion or keeps the configuration simple for systems with only one memory socket. No additional cables, brackets or software are included.

Low-voltage unbuffered DDR3 build

The module runs at 1.35 V with a standard CL9 latency and uses major OEM chips from Samsung, Micron or Hynix. It is a non-ECC, unbuffered 204-pin SODIMM without a heat spreader, designed to fit the tight internal clearances of the EK-1530 chassis. Compatibility is validated for the listed POSIFLEX kiosk platform.

Přednosti

  • Built for POSIFLEX EK-1530 kiosks
  • DDR3 1333 speed for responsive operation
  • Non-ECC unbuffered design matches system specs
  • 35 V low-voltage module reduces heat
  • 204-pin SODIMM form factor fits the slot

Specifikace

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

Does the 204-pin DDR3 SODIMM need any periodic cleaning or module replacement over time?

No, the module has no moving parts and no heat spreader, so it requires no scheduled maintenance; it is designed to remain installed for the life of the POSIFLEX EK-1530 kiosk.

What electrical limit appears first when the 1.35 V 2Rx8 module runs continuously under full load?

The JEDEC DDR3 1333 specification caps the data rate at 1333 MT/s, so sustained throughput cannot exceed the PC3-10600 bandwidth ceiling regardless of workload duration.

How much extra heat or fan noise does the non-ECC unbuffered SODIMM add when the kiosk operates all day?

The 1.50 V DDR3 SODIMM draws only standard DDR3 power and has no heat spreader, so it adds negligible heat and zero acoustic noise to the POSIFLEX EK-1530 enclosure.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.