Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz POSIFLEX KS-7410 memory upgrade

SKU CH-4KA0-695BX

4GB DDR3 1333MHz SODIMM module built for the POSIFLEX KS-7410 terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX KS-7410 terminal compatibility
  • 4GB DDR3 1333MHz PC3-10600 capacity for multitasking
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits compact POS slot
  • Rigorously stress-tested modules ensure system stability

POSIFLEX KS-7410 memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX KS-7410 compact fanless POS terminal. It targets retailers and system integrators who need a direct, validated replacement for the original memory module. The 204-pin form factor matches the terminal’s SO-DIMM slot exactly.

4 GB DDR3 1333 MHz capacity and headroom

Running at 1333 MHz with CL9 latency, the module supplies 4 GB of non-ECC unbuffered memory. That amount handles typical point-of-sale workloads such as transaction processing and inventory lookup. Heavier multitasking or larger local databases will exceed the available capacity.

Replaces the original module in the KS-7410

The upgrade swaps the factory-installed stick for a tested 4 GB alternative using major OEM chips. The jump is worth it when the terminal shows sluggish response or cannot keep the required applications open simultaneously. It does not add a second slot or support higher densities.

Přednosti

  • Designed for POSIFLEX KS-7410 terminal compatibility
  • 4GB DDR3 1333MHz PC3-10600 capacity for multitasking
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits compact POS slot
  • Rigorously stress-tested modules ensure system stability

Specifikace

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

Will this 204-pin DDR3 SODIMM work alongside the existing memory in my POSIFLEX KS-7410 terminal?

Yes, this module is designed for the KS-7410 and uses standard DDR3 1333MHz PC3-10600 timing, so it will operate with the system's current memory configuration.

How can I verify the module is running at the correct 1333MHz speed and CL9 latency after installation?

Enter the BIOS or use a system information tool in the operating system to confirm the memory reports DDR3-1333 (PC3-10600) with CAS latency 9.

Does the package include only the 4GB SODIMM or are any tools or adapters supplied?

The box contains the single 4GB 204-pin DDR3 SODIMM module; no tools, adapters or additional components are included.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.