Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 512GB 8x64GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-1NC7-SVCB4

Eight 64 GB DDR5 RDIMMs deliver 512 GB of registered ECC memory at 5600 MT/s for the Supermicro H14DST-F

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 512GB 8X64GB

Zobrazit dalších 30 konfigurací
  • 512 GB total capacity from eight 64 GB modules for large-scale workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-F motherboard

Exact-match DDR5 server upgrade

This 512GB kit contains eight 64GB DDR5-5600 registered ECC RDIMMs built for the Supermicro H14DST-F motherboard. The modules run at 1.1V with CL46 latency and a 2Rx4 rank structure that matches the board's memory controller requirements. Registered buffering allows full population of every slot while ECC corrects single-bit errors on the fly.

DDR5-5600 registered ECC limits

The 288-pin RDIMM form factor fits only motherboards wired for registered DDR5 memory; it will not work in UDIMM or SODIMM slots. Population rules on the H14DST-F dictate which slots must be filled first and how many ranks each channel can address. Exceeding the board's validated capacity or mixing ranks can prevent the system from posting at the rated 5600MT/s speed.

2Rx4 rank and 1.1V specification

The dual-rank 2Rx4 organisation and 1.1V operating voltage are the decisive parameters for compatibility with this server platform. A different rank count or voltage would change the electrical load on the memory controller and cause training failures or reduced performance. Verify the motherboard manual for approved DIMM population order before installation.

Přednosti

  • 512 GB total capacity from eight 64 GB modules for large-scale workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-F motherboard

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I choose the 512GB kit or a smaller capacity for my Supermicro H14DST-F?

The kit provides 512GB total across eight 64GB modules. Check your motherboard manual for the maximum supported capacity and the approved DIMM population order before deciding.

What does the 5600 speed rating mean once the modules are installed in the server?

The modules run at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V. Registered ECC architecture lets every slot operate at this rated speed when fully populated.

How does the 288-pin RDIMM interface affect what the memory controller can handle?

The 288-pin Registered RDIMM form factor buffers address and command signals, allowing the controller to drive all eight slots at full 5600 MT/s without signal degradation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.