Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 64GB (8x8GB) DDR4 2400 CL17 ECC RDIMM memory upgrade for ASRock Rack ROMED8-2T EPYC

SKU CH-ARGN-3WTAP

64 GB registered DDR4-2400 ECC kit with eight 8 GB modules at CL17 and 1.2 V for the ASRock Rack ROMED8-2T EPYC motherboard

  • Capacity64GB (8 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB 8X8GB

  • 64GB capacity across eight 8GB modules for high-density server workloads
  • DDR4 2400 speed with CL17 latency for responsive data access
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 2V operation reduces power draw while maintaining stability
  • 288-pin form factor ensures direct compatibility with ASRock Rack ROMED8-2T EPYC platform

System-specific 64 GB DDR4 kit

This 64 GB kit contains eight 8 GB DDR4-2400 registered DIMMs built for the ASRock Rack ROMED8-2T EPYC platform. Each module runs at 1.2 V with CL17 latency and includes ECC for data integrity. The 288-pin RDIMM form factor fits the server board’s memory slots directly.

Suited for eight-slot EPYC server upgrades

This kit matches the ROMED8-2T’s eight-channel architecture and registered ECC requirement. Builders needing unbuffered UDIMMs, non-ECC memory, higher speeds or a different module count should look at other system-specific kits. Capacity and rank are fixed at 64 GB and 1Rx8 respectively.

DDR4-2400 CL17 registered ECC spec

The decisive specification is DDR4-2400 (PC4-19200) with CL17 timing, 1.2 V operation, registered signalling and on-die ECC. Only modules meeting this exact combination will initialise correctly on the target motherboard.

Přednosti

  • 64GB capacity across eight 8GB modules for high-density server workloads
  • DDR4 2400 speed with CL17 latency for responsive data access
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 2V operation reduces power draw while maintaining stability
  • 288-pin form factor ensures direct compatibility with ASRock Rack ROMED8-2T EPYC platform

Specifikace

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-818K8
Capacity64GB (8 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (8X8GB) DDR4 2400MHZ PC4-19200 1Rx8 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 1Rx8 registered ECC DDR4 modules work alongside existing RDIMMs in my ASRock Rack ROMED8-2T EPYC server?

Yes, the 1Rx8 registered ECC DDR4 modules are designed for the ASRock Rack ROMED8-2T EPYC platform. Match speed, voltage, rank and ECC type with any installed RDIMMs and follow the motherboard population rules for best stability.

How can I verify the 64GB kit is running at the correct 2400 MT/s with CL17 latency after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 2400 MT/s and CAS latency shows CL17. You can also use a tool such as CPU-Z or dmidecode inside the OS to validate the reported speed and timings.

Does the package contain only the eight 8GB RDIMMs or are any cables, brackets or tools included?

The package contains only the eight 8GB DDR4 2400 CL17 1.20V 288-pin ECC RDIMM modules. No cables, brackets, tools or additional accessories are included.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.