Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 204-pin SODIMM module with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 SODIMM POSIFLEX PS-3615 memory upgrade

SKU CH-EVZF-0DN6S

8GB DDR3 1333 SODIMM module upgrades compatible POSIFLEX PS-3615 terminals with 204-pin memory

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity boosts POS terminal multitasking
  • DDR3 1333 speed matches PS-3615 specifications
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits factory memory slot
  • Tested with Samsung Micron Hynix chips for reliability

Compatible POS Terminal Upgrade

This NEMIX RAM module adds 8GB of DDR3 memory to the POSIFLEX PS-3615 point-of-sale terminal. It is built for fanless systems that run continuous retail or hospitality workloads. The SODIMM format fits the single memory slot in these compact units.

Low-Voltage Unbuffered Operation

The module runs at 1.35V with a CL9 latency at 1333MHz, keeping power draw and heat low inside the sealed chassis. Unbuffered, non-ECC chips avoid the overhead of registered designs. No heat spreader is fitted, relying on the terminal's passive cooling.

204-Pin SODIMM Form Factor

The 204-pin edge connector matches the factory socket exactly for tool-free installation. Major-brand Samsung, Micron or Hynix ICs are used on a 2Rx8 layout. Buyers needing ECC error correction or registered buffering for server workloads should look elsewhere.

Přednosti

  • 8GB capacity boosts POS terminal multitasking
  • DDR3 1333 speed matches PS-3615 specifications
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits factory memory slot
  • Tested with Samsung Micron Hynix chips for reliability

Specifikace

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

How do I install this 204-pin SODIMM in the PS-3615, and what step is often missed?

Power off the terminal, open the memory door, insert the module at an angle until the gold contacts are hidden, then press down until both side clips click; the step often missed is verifying the clips have fully locked on both sides.

What maintenance or replacement will this DDR3 module need later?

No scheduled maintenance is required; if the terminal becomes unstable, reseat the module and clean the contacts with isopropyl alcohol, otherwise it runs for the life of the system.

What limit appears first under sustained load on this 1.35V CL9 kit?

The DDR3 1333 bandwidth ceiling is reached before thermal throttling, since the unbuffered SODIMM has no heat spreader and operates at standard voltage.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.