Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, no heat spreader, 288-pin DDR4 RDIMM

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM Gigabyte MZ32-AR0 EPYC memory upgrade

SKU CH-7XMW-BDYW3

8 GB DDR4 3200 ECC registered DIMM, CL22, 1.20 V, validated for Gigabyte MZ32-AR0 EPYC servers

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 3200 capacity expands server memory headroom
  • ECC registered design corrects data errors for uptime
  • CL22 1.20V timing balances speed with stability
  • 288-pin RDIMM form factor fits Gigabyte MZ32-AR0 slots
  • Samsung Micron Hynix chips deliver OEM-grade reliability

Gigabyte MZ32-AR0 EPYC DDR4 upgrade

This 8 GB DDR4 3200 ECC RDIMM module is built for the Gigabyte MZ32-AR0 motherboard running AMD EPYC processors. It targets server and workstation administrators who need registered memory with error correction for stable operation under continuous load.

Verify registered DIMM support and slot layout

Before ordering, confirm that the motherboard requires registered DDR4 RDIMMs and not unbuffered UDIMMs or LRDIMMs. Check the manual for the correct slot population order and maximum supported capacity per channel so the module installs in a supported configuration.

Low-voltage operation keeps thermals modest

Running at 1.20 V with CL22 latency, the module draws minimal power and produces little heat during normal server workloads. The lack of a heat spreader means airflow across the PCB is sufficient for cooling, and the registered buffer adds negligible acoustic contribution to the system.

Přednosti

  • 8GB DDR4 3200 capacity expands server memory headroom
  • ECC registered design corrects data errors for uptime
  • CL22 1.20V timing balances speed with stability
  • 288-pin RDIMM form factor fits Gigabyte MZ32-AR0 slots
  • Samsung Micron Hynix chips deliver OEM-grade reliability

Specifikace

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

What comes in the package and do I need any extra parts to install this memory?

The package contains one 8GB DDR4 3200 ECC RDIMM module. No additional components are required for installation into a compatible Gigabyte MZ32-AR0 motherboard.

Should I choose a different capacity or rank configuration for my Gigabyte MZ32-AR0 EPYC system?

This module is an 8GB single-rank 1Rx8 RDIMM. Select higher-capacity or dual-rank modules only if your workload and motherboard slot population rules require more memory per slot.

What does the 3200MHz speed rating deliver when the module is running in a Gigabyte MZ32-AR0 EPYC server?

The module operates at DDR4 3200 with CL22 latency at 1.20V, providing the rated PC4-25600 bandwidth when the platform memory controller is configured for that speed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.