SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00500607BTC
Skladem
NEMIX RAM
NEMIX RAM 96GB 2x48GB DDR5 6400 ECC Registered RDIMM memory upgrade
A 96 GB kit of two 48 GB DDR5 6400 ECC registered RDIMMs at CL52 and 1.1 V for Supermicro H14DSH servers
- Capacity96GB (2 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB capacity in a 2 x 48 GB kit for high-density server workloads
- DDR5 6400 speed with CL52 latency for rated performance on supported platforms
- ECC registered RDIMM design corrects single-bit errors and offloads the memory controller
- 1 V operation at 2Rx8 rank matches the Supermicro H14DSH memory controller requirements
- 288-pin RDIMM form factor fits the exact slot type required by the motherboard
Server-ready DDR5 ECC RDIMM kit
This 96 GB kit consists of two 48 GB DDR5 6400 Registered ECC modules built to the 288-pin RDIMM form factor. It targets administrators upgrading a Supermicro H14DSH motherboard that requires registered memory with on-die ECC for production workloads.
Population rules limit maximum capacity
Registered architecture lets the board run every slot at full speed, but the motherboard manual defines which slots must be filled first and the total capacity the platform supports. Buyers who need a larger total than the platform allows must choose a different configuration.
CL52 at 1.1 V decides compatibility
The memory controller expects exactly CL52 timing at 1.10 V; modules with other latencies or voltages will not train at the rated 6400 MT/s. Verify the manual’s approved DIMM list before ordering.
Přednosti
- 96 GB capacity in a 2 x 48 GB kit for high-density server workloads
- DDR5 6400 speed with CL52 latency for rated performance on supported platforms
- ECC registered RDIMM design corrects single-bit errors and offloads the memory controller
- 1 V operation at 2Rx8 rank matches the Supermicro H14DSH memory controller requirements
- 288-pin RDIMM form factor fits the exact slot type required by the motherboard
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Should I choose the 96GB 2x48GB kit or a single 48GB module for my Supermicro H14DSH?
The 2x48GB kit populates two slots with matched 2Rx8 registered ECC DIMMs, letting the board run dual-channel at DDR5-6400 with full 96GB capacity. A single module would halve bandwidth and total memory.
What does the DDR5-6400 CL52 rating deliver once installed in the H14DSH?
The memory controller will recognise the kit at its rated 6400 MT/s with 52-cycle CAS latency, providing PC5-51200 throughput while ECC corrects single-bit errors on the fly.
How does the 288-pin registered RDIMM interface affect speed and capacity limits on this motherboard?
The RDIMM's register buffers address and command signals, allowing the H14DSH to run both slots fully populated at DDR5-6400 without signal degradation that would otherwise force lower speeds.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00095769BTC
Skladem