暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules, no heat spreaders, 288-pin gold contacts, 96GB kit

NEMIX RAM

NEMIX RAM 96GB 2x48GB DDR5 6400 ECC Registered RDIMM memory upgrade

SKU CH-BPN5-DVKTK

A 96 GB kit of two 48 GB DDR5 6400 ECC registered RDIMMs at CL52 and 1.1 V for Supermicro H14DSH servers

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity in a 2 x 48 GB kit for high-density server workloads
  • DDR5 6400 speed with CL52 latency for rated performance on supported platforms
  • ECC registered RDIMM design corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx8 rank matches the Supermicro H14DSH memory controller requirements
  • 288-pin RDIMM form factor fits the exact slot type required by the motherboard

Server-ready DDR5 ECC RDIMM kit

This 96 GB kit consists of two 48 GB DDR5 6400 Registered ECC modules built to the 288-pin RDIMM form factor. It targets administrators upgrading a Supermicro H14DSH motherboard that requires registered memory with on-die ECC for production workloads.

Population rules limit maximum capacity

Registered architecture lets the board run every slot at full speed, but the motherboard manual defines which slots must be filled first and the total capacity the platform supports. Buyers who need a larger total than the platform allows must choose a different configuration.

CL52 at 1.1 V decides compatibility

The memory controller expects exactly CL52 timing at 1.10 V; modules with other latencies or voltages will not train at the rated 6400 MT/s. Verify the manual’s approved DIMM list before ordering.

特長

  • 96 GB capacity in a 2 x 48 GB kit for high-density server workloads
  • DDR5 6400 speed with CL52 latency for rated performance on supported platforms
  • ECC registered RDIMM design corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx8 rank matches the Supermicro H14DSH memory controller requirements
  • 288-pin RDIMM form factor fits the exact slot type required by the motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Should I choose the 96GB 2x48GB kit or a single 48GB module for my Supermicro H14DSH?

The 2x48GB kit populates two slots with matched 2Rx8 registered ECC DIMMs, letting the board run dual-channel at DDR5-6400 with full 96GB capacity. A single module would halve bandwidth and total memory.

What does the DDR5-6400 CL52 rating deliver once installed in the H14DSH?

The memory controller will recognise the kit at its rated 6400 MT/s with 52-cycle CAS latency, providing PC5-51200 throughput while ECC corrects single-bit errors on the fly.

How does the 288-pin registered RDIMM interface affect speed and capacity limits on this motherboard?

The RDIMM's register buffers address and command signals, allowing the H14DSH to run both slots fully populated at DDR5-6400 without signal degradation that would otherwise force lower speeds.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。