Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green bare circuit board with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM server RAM

SKU CH-9FSS-R30FV

A 96 GB DDR5 registered ECC module running at 4800 MT/s with CL40 latency and 1.1 V operation for server workloads

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Capacity 96GB

  • 96 GB capacity supports memory-intensive server workloads
  • DDR5 4800 speed delivers high bandwidth for data processing
  • ECC registered design detects and corrects memory errors
  • 1 V operation reduces power draw in dense configurations
  • 2Rx4 dual-rank organisation maximises density per DIMM slot

High-Capacity DDR5 Server Module

This 96GB DDR5 ECC RDIMM operates at 4800 MT/s with a CL40 latency and 1.10V voltage. It is built for servers and workstations that require registered memory with error correction. The single-module design delivers high density for multi-socket platforms.

Registered Design With Major OEM Chips

The 288-pin RDIMM uses a 2Rx4 organisation and chips sourced from Samsung, Micron or Hynix. Registered buffering reduces electrical load on the memory controller, supporting stable operation in dense configurations. No heat spreader is fitted, so airflow across the PCB is required.

DDR5 4800 Platform Constraints

The module runs at the base DDR5 4800 speed; higher data rates depend on the platform memory controller and BIOS support. Registered ECC memory is not compatible with consumer desktop boards that accept only unbuffered DIMMs. Buyers needing unbuffered memory or speeds above 4800 MT/s should verify platform specifications first.

Přednosti

  • 96 GB capacity supports memory-intensive server workloads
  • DDR5 4800 speed delivers high bandwidth for data processing
  • ECC registered design detects and corrects memory errors
  • 1 V operation reduces power draw in dense configurations
  • 2Rx4 dual-rank organisation maximises density per DIMM slot

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Memory Motherboard Compatible

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the DDR5 4800 PC5-38400 standard mean for real-world bandwidth?

The module operates at DDR5 4800 with a PC5-38400 data rate, delivering the JEDEC base speed for this generation.

Will the 288-pin RDIMM fit my server board and chassis?

It uses the standard 288-pin DDR5 RDIMM form factor with a 2Rx4 layout and no heat spreader, so it fits any DDR5 RDIMM slot with normal clearance.

What is the correct installation sequence for a single 96 GB ECC registered DIMM?

Populate the slot your motherboard manual designates for single-DIMM operation, align the key notch, press until the ejector tabs click, then verify in BIOS that ECC and registered mode are active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.