Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM DDR5 4800 768GB 8x96GB CL40 1.1V ECC RDIMM 2Rx4 Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-NWX1-ER6C6

768GB eight-module kit of DDR5 4800 registered ECC RDIMM memory built for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 768 GB total capacity across 8 matched 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency and 1.10 V operation matches controller specs exactly
  • Registered ECC RDIMM architecture enables full-slot population while correcting single-bit errors
  • 2Rx4 dual-rank layout and 288-pin form factor fit Supermicro H13DSG-O-CPU-D memory rules
  • Lifetime replacement coverage with US-based technical support protects the investment

Exact-match DDR5-4800 kit for Supermicro

This 768GB kit contains eight 96GB DDR5 RDIMMs rated at 4800MHz PC5-38400 with CL40 timing and 1.10V operation. Registered ECC architecture with 2Rx4 organisation matches the memory controller requirements of the Supermicro H13DSG-O-CPU-D motherboard so the full capacity is recognised at rated speed. It is built for administrators who need maximum supported memory in that specific platform. Builders using other motherboards or requiring UDIMM or SODIMM form factors cannot use this kit.

Thermals noise and power at 1.10V standard voltage

Each module runs at the JEDEC 1.10V baseline without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all eight slots are populated, keeping power draw predictable. No active cooling is included so acoustic output depends entirely on the server fan curves set in the platform firmware. Systems with restricted airflow may need adjusted fan profiles to maintain thermal limits.

Eight-module kit enables full population without

The package supplies exactly eight 96GB RDIMMs, allowing complete population of the supported DIMM slots in a single purchase. Major OEM Samsung Micron or Hynix components are used under the NEMIX RAM Original Series label. Lifetime replacement warranty and US-based technical support are provided by the manufacturer. No additional software, cables or mounting hardware are bundled with the memory modules.

Přednosti

  • 768 GB total capacity across 8 matched 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency and 1.10 V operation matches controller specs exactly
  • Registered ECC RDIMM architecture enables full-slot population while correcting single-bit errors
  • 2Rx4 dual-rank layout and 288-pin form factor fit Supermicro H13DSG-O-CPU-D memory rules
  • Lifetime replacement coverage with US-based technical support protects the investment

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 8x96GB DDR5 4800 RDIMMs in the Supermicro H13DSG-O-CPU-D following the correct population order?

Power down the server, open the chassis, and insert each 288-pin module into the slots specified by the motherboard manual for an 8-DIMM configuration. The step most often missed is skipping the prescribed slot sequence, which prevents the memory controller from recognising the full 768GB at CL40.

What maintenance or replacement will the NEMIX RAM DDR5 4800 ECC RDIMM kit need over its service life?

The modules have no moving parts or heat spreaders, so routine maintenance is limited to keeping server airflow paths clean. If a single-bit error rate rises beyond ECC correction, the affected 96GB RDIMM can be replaced individually under lifetime replacement support.

What limit appears first when the 8x96GB DDR5 4800 CL40 kit runs sustained workloads on the H13DSG-O-CPU-D?

The registered buffer and 1.1V operation keep signal integrity stable, so the first practical ceiling is the motherboard's maximum supported capacity of 768GB across eight slots — once all slots are filled, no further memory can be added.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.