Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM DDR5 6400 1.5TB 12x128GB ECC RDIMM CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade

SKU CH-7ZAV-G95E4

A 1.5 TB DDR5 registered ECC kit of twelve 128 GB modules running at 6400 MT/s CL52 and 1.1 V, validated for the Supermicro H14DST-F motherboard

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 5 TB total capacity from twelve 128 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • 1 V registered ECC RDIMM architecture for full-slot stability
  • 2Rx4 dual-rank organisation matches controller expectations
  • 288-pin form factor validated for Supermicro H14DST-F

Exact-match server upgrade

This 1.5TB kit delivers twelve 128GB DDR5-6400 registered ECC RDIMMs built for the Supermicro H14DST-F motherboard. The modules match the board's required 2Rx4 rank structure, 1.1V operating voltage and CL52 timing so the memory controller recognises full capacity at rated speed.

Registered ECC stability

Each 288-pin RDIMM uses a registered architecture that buffers address and command signals, allowing all twelve slots to run fully populated without overloading the controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads.

Twelve-module population kit

The package supplies the complete 12x128GB configuration in a single matched set, removing the risk of mixing revision codes or timing bins across separate purchases. Installers must still follow the motherboard manual for approved DIMM population order and any BIOS settings required for full-speed operation.

Přednosti

  • 5 TB total capacity from twelve 128 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • 1 V registered ECC RDIMM architecture for full-slot stability
  • 2Rx4 dual-rank organisation matches controller expectations
  • 288-pin form factor validated for Supermicro H14DST-F

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

What DDR5 speed and PC5 bandwidth does this 12-module kit run at?

The kit operates at DDR5 6400 with a PC5-51200 data rate, so every module transfers at that rated speed when the motherboard supports it.

What physical slot and form factor must the Supermicro H14DST-F provide for these 288-pin RDIMMs?

The board needs standard 288-pin DDR5 RDIMM slots; the modules are registered ECC DIMMs and will not fit UDIMM or SODIMM sockets.

In what order should the 12 DIMMs be populated on the H14DST-F to avoid a no-post condition?

Follow the motherboard manual's exact population sequence for 12 DIMMs per CPU; skipping the prescribed slot order is the most common cause of boot failure.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.