NEMIX RAM
NEMIX RAM DDR5 6400 1.5TB 12x128GB ECC RDIMM CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade
A 1.5 TB DDR5 registered ECC kit of twelve 128 GB modules running at 6400 MT/s CL52 and 1.1 V, validated for the Supermicro H14DST-F motherboard
- Capacity1.5TB (12 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 5 TB total capacity from twelve 128 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- 1 V registered ECC RDIMM architecture for full-slot stability
- 2Rx4 dual-rank organisation matches controller expectations
- 288-pin form factor validated for Supermicro H14DST-F
Exact-match server upgrade
This 1.5TB kit delivers twelve 128GB DDR5-6400 registered ECC RDIMMs built for the Supermicro H14DST-F motherboard. The modules match the board's required 2Rx4 rank structure, 1.1V operating voltage and CL52 timing so the memory controller recognises full capacity at rated speed.
Registered ECC stability
Each 288-pin RDIMM uses a registered architecture that buffers address and command signals, allowing all twelve slots to run fully populated without overloading the controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads.
Twelve-module population kit
The package supplies the complete 12x128GB configuration in a single matched set, removing the risk of mixing revision codes or timing bins across separate purchases. Installers must still follow the motherboard manual for approved DIMM population order and any BIOS settings required for full-speed operation.
จุดเด่น
- 5 TB total capacity from twelve 128 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- 1 V registered ECC RDIMM architecture for full-slot stability
- 2Rx4 dual-rank organisation matches controller expectations
- 288-pin form factor validated for Supermicro H14DST-F
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 12X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
What DDR5 speed and PC5 bandwidth does this 12-module kit run at?
The kit operates at DDR5 6400 with a PC5-51200 data rate, so every module transfers at that rated speed when the motherboard supports it.
What physical slot and form factor must the Supermicro H14DST-F provide for these 288-pin RDIMMs?
The board needs standard 288-pin DDR5 RDIMM slots; the modules are registered ECC DIMMs and will not fit UDIMM or SODIMM sockets.
In what order should the 12 DIMMs be populated on the H14DST-F to avoid a no-post condition?
Follow the motherboard manual's exact population sequence for 12 DIMMs per CPU; skipping the prescribed slot order is the most common cause of boot failure.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



