NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 256GB (2x128GB) Supermicro H13SVW-NT memory upgrade
256GB DDR5-6400 ECC registered RDIMM kit (2×128GB, CL52, 1.1V) validated for the Supermicro H13SVW-NT motherboard
- Capacity256GB (2 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256GB total capacity with two 128GB modules
- DDR5-6400 speed rated at PC5-51200 bandwidth
- CL52 latency at 1.1V operating voltage
- 2Rx4 registered ECC for error correction
- 288-pin RDIMM form factor fits Supermicro H13SVW-NT
256GB DDR5 6400 ECC RDIMM kit
This 256GB kit contains two 128GB DDR5 6400 registered ECC RDIMMs built for the Supermicro H13SVW-NT motherboard. Modules run at 1.1V with CL52 latency and a 2Rx4 organisation. The registered design lets the board run fully populated at rated speed while ECC corrects single-bit errors on the fly.
Ideal for Supermicro H13SVW-NT upgrades
Suits administrators expanding a Supermicro H13SVW-NT server to its maximum supported capacity with validated registered ECC modules. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory or speeds other than DDR5 6400 should select a different kit.
DDR5 6400 registered ECC with 2Rx4 ranks
The memory controller on the H13SVW-NT expects DDR5 6400 registered ECC RDIMMs at 1.1V with a 2Rx4 rank structure. Matching this exact rank, voltage and timing ensures the system recognises the full 256GB and operates at the rated 6400 MT/s data rate.
Přednosti
- 256GB total capacity with two 128GB modules
- DDR5-6400 speed rated at PC5-51200 bandwidth
- CL52 latency at 1.1V operating voltage
- 2Rx4 registered ECC for error correction
- 288-pin RDIMM form factor fits Supermicro H13SVW-NT
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Does this kit require a Supermicro H13SVW-NT motherboard with DDR5 RDIMM slots to function?
Yes, the 288-pin DDR5 RDIMM form factor is designed specifically for the Supermicro H13SVW-NT motherboard's registered DIMM slots and will not fit UDIMM or SODIMM sockets.
Can I mix these 2Rx4 CL52 modules with existing DDR5 RDIMMs of a different rank or speed on the same board?
Mixing ranks or speeds is not recommended; the motherboard's memory controller expects matched 2Rx4 CL52 modules at 1.1V to run all channels at the rated DDR5 6400 speed without downclocking.
How do I confirm the full 256GB is recognised and running at 6400MT/s after installation?
Enter the system BIOS or UEFI and verify the memory information screen shows 256GB total capacity, DDR5 6400 speed, CL52 timings, and ECC active across both DIMMs.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



