We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks with black chips and gold contacts lying side by side

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 256GB (2x128GB) Supermicro H13SVW-NT memory upgrade

SKU CH-JP27-1J5G8

256GB DDR5-6400 ECC registered RDIMM kit (2×128GB, CL52, 1.1V) validated for the Supermicro H13SVW-NT motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256GB total capacity with two 128GB modules
  • DDR5-6400 speed rated at PC5-51200 bandwidth
  • CL52 latency at 1.1V operating voltage
  • 2Rx4 registered ECC for error correction
  • 288-pin RDIMM form factor fits Supermicro H13SVW-NT

256GB DDR5 6400 ECC RDIMM kit

This 256GB kit contains two 128GB DDR5 6400 registered ECC RDIMMs built for the Supermicro H13SVW-NT motherboard. Modules run at 1.1V with CL52 latency and a 2Rx4 organisation. The registered design lets the board run fully populated at rated speed while ECC corrects single-bit errors on the fly.

Ideal for Supermicro H13SVW-NT upgrades

Suits administrators expanding a Supermicro H13SVW-NT server to its maximum supported capacity with validated registered ECC modules. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory or speeds other than DDR5 6400 should select a different kit.

DDR5 6400 registered ECC with 2Rx4 ranks

The memory controller on the H13SVW-NT expects DDR5 6400 registered ECC RDIMMs at 1.1V with a 2Rx4 rank structure. Matching this exact rank, voltage and timing ensures the system recognises the full 256GB and operates at the rated 6400 MT/s data rate.

Highlights

  • 256GB total capacity with two 128GB modules
  • DDR5-6400 speed rated at PC5-51200 bandwidth
  • CL52 latency at 1.1V operating voltage
  • 2Rx4 registered ECC for error correction
  • 288-pin RDIMM form factor fits Supermicro H13SVW-NT

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Does this kit require a Supermicro H13SVW-NT motherboard with DDR5 RDIMM slots to function?

Yes, the 288-pin DDR5 RDIMM form factor is designed specifically for the Supermicro H13SVW-NT motherboard's registered DIMM slots and will not fit UDIMM or SODIMM sockets.

Can I mix these 2Rx4 CL52 modules with existing DDR5 RDIMMs of a different rank or speed on the same board?

Mixing ranks or speeds is not recommended; the motherboard's memory controller expects matched 2Rx4 CL52 modules at 1.1V to run all channels at the rated DDR5 6400 speed without downclocking.

How do I confirm the full 256GB is recognised and running at 6400MT/s after installation?

Enter the system BIOS or UEFI and verify the memory information screen shows 256GB total capacity, DDR5 6400 speed, CL52 timings, and ECC active across both DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.