Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM sticks in a row, gold contacts visible, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 768GB 8X96GB 4800 CL40 1.1V 2Rx4 Supermicro H13DSG-O-CPU memory upgrade

SKU CH-2K0C-9H6JZ

768 GB DDR5 server memory kit of eight 96 GB registered ECC RDIMMs at 4800 MT/s, CL40, 1.1 V, validated for the Supermicro H13DSG-O-CPU motherboard

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Zobrazit dalších 30 konfigurací
  • 768 GB total capacity from eight 96 GB modules for large workloads
  • DDR5 4800 speed with CL40 timing matches the server controller specification
  • Registered ECC design with 2Rx4 organisation corrects errors and drives full population
  • 1 V operation at 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR5 server kit

This NEMIX RAM kit delivers 768 GB of DDR5 ECC registered memory across eight 96 GB RDIMM modules. It runs at 4800 MT/s with CL40 latency at 1.1 V and is built to the precise rank, voltage and timing the Supermicro H13DSG-O-CPU motherboard expects for full-capacity operation.

Suited for full-population server builds

The registered architecture offloads the memory controller so every slot runs fully populated at rated speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption. Builders using UDIMM-only boards or workstations that require unbuffered modules should choose a different kit.

DDR5 4800 CL40 2Rx4 1.1 V spec

The single specification that decides fitment is the DDR5-4800 CL40 2Rx4 registered module at 1.1 V in 288-pin RDIMM form factor. If your platform demands a different speed, rank, voltage or form factor this kit will not be recognised or will run below its rated performance.

Přednosti

  • 768 GB total capacity from eight 96 GB modules for large workloads
  • DDR5 4800 speed with CL40 timing matches the server controller specification
  • Registered ECC design with 2Rx4 organisation corrects errors and drives full population
  • 1 V operation at 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU
  • Lifetime replacement warranty with US-based technical support included

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the eight 96GB DDR5 RDIMMs in the Supermicro H13DSG-O-CPU and which population step is most often missed?

Populate all eight slots following the motherboard manual's exact DIMM sequence for eight modules; the step most often missed is skipping the prescribed order, which prevents the system from recognising the full 768GB at DDR5-4800.

What maintenance or replacement will this 2Rx4 registered ECC kit need over its service life?

The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; only a failed DIMM would need replacement under the lifetime warranty.

What limit appears first when the 768GB kit runs sustained workloads at CL40?

The registered buffer and ECC logic keep every slot stable at the rated 4800 MT/s and 1.10 V, so the first limit encountered is the motherboard's maximum supported capacity of 768GB.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.