Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
White mid-tower case with dual tempered glass sides and perforated steel panels

NZXT

NZXT CM-H92FW-01 H9 Flow (2025) White ATX Mid-Tower PC Case

SKU CH-AQZC-2QRNE MPN CM-H92FW-01

A dual-chamber ATX mid-tower with perforated steel panels, four pre-installed fans, support for up to ten fans and 420 mm radiators, and wraparound tempered glass

  • Motherboard CompatibilityATX, E-ATX motherboards, full tower radiators (up to 420mm),
  • ColorWhite
  • TypeATX Mid Tower
  • Power SupplyATX, E-ATX motherboards, full tower radiators (up to 420mm),
  • With Power SupplyNo
  • Side Panel2 x Sides Tempered Glass Panel
  • Dual-chamber layout separates power supply from main components for cleaner thermals
  • Four pre-installed fans deliver immediate airflow out of the box
  • Supports up to ten fans including nine 140 mm positions for maximum cooling
  • Fits 420 mm radiators on top and front-right for high-capacity liquid cooling
  • Wraparound tempered glass panels give a panoramic view of the build

Built for high-performance builds

The H9 Flow is a spacious mid-tower ATX case designed for high-performance builds that prioritise airflow and aesthetics. Its dual-chamber layout separates the motherboard, GPU and CPU cooler from the power supply and drives, improving thermal performance and cable routing. Perforated steel panels and angled front-right fans feed cool air directly to the hottest components. The case ships with three 140 mm fans in the front-right chamber and one 120 mm fan at the rear.

Check motherboard and GPU clearance

Verify that your motherboard is ATX or E-ATX and that it fits the dual-chamber layout, including ASUS BTF or MSI Project Zero back-connect designs. The front-right chamber accepts graphics cards up to 435 mm long, so measure your card before ordering. Radiator mounts on the top and front-right support up to 420 mm units; confirm your cooler dimensions match. Ten fan mounts are available — nine for 140 mm fans and one for a 120 mm rear fan — plan your fan count accordingly.

Thermals noise and power draw

The pre-installed F140Q and F120Q fans run on 3-pin DC control, letting the motherboard adjust speed based on temperature. With all four fans spinning at low RPM the case moves a large volume of air through the mesh panels while keeping noise low. Under heavy loads the dual-chamber design isolates GPU heat from the CPU area, helping both components stay cooler without raising fan speeds dramatically. The open mesh and ten possible fan positions give you headroom to scale airflow up or down as your build demands.

Přednosti

  • Dual-chamber layout separates power supply from main components for cleaner thermals
  • Four pre-installed fans deliver immediate airflow out of the box
  • Supports up to ten fans including nine 140 mm positions for maximum cooling
  • Fits 420 mm radiators on top and front-right for high-capacity liquid cooling
  • Wraparound tempered glass panels give a panoramic view of the build

Specifikace

Motherboard CompatibilityATX, E-ATX motherboards, full tower radiators (up to 420mm), high-end graphics cards, various cooling systems, ASUS BTF and MSI Project Zero motherboards
ColorWhite
TypeATX Mid Tower
Power SupplyATX, E-ATX motherboards, full tower radiators (up to 420mm), high-end graphics cards, various cooling systems, ASUS BTF and MSI Project Zero motherboards
With Power SupplyNo
Side Panel2 x Sides Tempered Glass Panel
BrandNZXT
SeriesH9 Flow
ModelNZXT H9
Part NumberCM-H92FW-01
80mm FansNo
Pre-installed FansRear - 1 x 120mm / Side - 3 x 140mm
Hot-Swap Drive Bays0
Max GPU LengthATX, E-ATX motherboards, full tower radiators (up to 420mm), high-end graphics cards, various cooling systems, ASUS BTF and MSI Project Zero motherboards
Max CPU Cooler HeightATX, E-ATX motherboards, full tower radiators (up to 420mm), high-end graphics cards, various cooling systems, ASUS BTF and MSI Project Zero motherboards
Dimensions19.9" x 12.4" x 18.9"
Weight27.56 lbs.
Přepravní hmotnost0.45 kg
Rozměry balení25 × 25 × 25 mm

Otázky k tomuto produktu

Will a 435 mm graphics card fit in this case?

Yes, the case supports GPUs up to 435 mm, so a card of that length will fit without modification.

How many fans can I install in total?

The chassis supports up to ten fans: nine 140 mm positions across the top, front-right and bottom, plus one 120 mm rear slot.

Can I mount a 420 mm radiator on the top panel?

Yes, the top and front-right panels each accept radiators up to 420 mm for liquid-cooling builds.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.