Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 360mm AIO cooler with three 120mm fans, square pump head featuring infinity mirror RGB ring, braided tubes

NZXT

NZXT Kraken X73 RL-KRX73-01 360mm liquid cooler

SKU CH-DZN8-5BPX7 MPN RL-KRX73-01

A 360 mm all-in-one liquid cooler with three 120 mm fluid-dynamic-bearing fans, a rotatable infinity-mirror pump head and CAM software control for Intel LGA 1700 and AMD AM4 sockets

  • TypeLiquid Cooling System
  • Block CompatibilityIntel Socket LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 /
  • Block Dim.80 x 80 x 55 mm
  • Block MaterialCopper & Plastic
  • Radiator Size394.00 x 121.00 x 27.00 mm
  • Radiator MaterialAluminum

Fan Size 3 Fan Slots (120mm)

Color Black

Model Kraken X73

Zobrazit dalších 1 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Adjustable pump-head orientation keeps the logo upright without re-mounting
  • 10% larger infinity-mirror ring delivers brighter RGB illumination
  • CAM software integration enables precise fan and pump control
  • Aer P120 fluid-dynamic-bearing fans run 21 to 36 dBA while moving up to 73.11 CFM
  • Nylon-braided ultra-low-evaporation tubing resists kinks and permeation over time

360 mm AIO RGB liquid cooler

The NZXT Kraken X73 RL-KRX73-01 is a 360 mm all-in-one liquid cooler with a rotating infinity-mirror pump head. Three Aer P120 fans push up to 73.11 CFM at 2000 RPM while noise stays between 21 and 36 dBA. CAM software controls pump speed, fan curves and RGB lighting.

Suits Intel LGA 1700 and AMD AM4 builds

Fits Intel sockets from LGA 1150 to LGA 2066 plus AMD AM4 and Threadripper when a separate bracket is sourced. Builders who need Threadripper sTRX4 support must obtain the extra bracket themselves. Cases without room for a 394 mm radiator or a 400 mm tube run should look at smaller coolers.

394 mm radiator length decides fit

The aluminium radiator measures 394 mm long, 121 mm wide and 27 mm thick, so the chassis must clear that length plus fan depth. If the case top or front panel cannot accommodate a 360 mm radiator stack, this cooler will not install.

Přednosti

  • Adjustable pump-head orientation keeps the logo upright without re-mounting
  • 10% larger infinity-mirror ring delivers brighter RGB illumination
  • CAM software integration enables precise fan and pump control
  • Aer P120 fluid-dynamic-bearing fans run 21 to 36 dBA while moving up to 73.11 CFM
  • Nylon-braided ultra-low-evaporation tubing resists kinks and permeation over time

Specifikace

BrandNZXT
SeriesKraken X73
ModelRL-KRX73-01
TypeLiquid Cooling System
Block CompatibilityIntel Socket LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150
Intel Core i9 / Core i7 / Core i5 / Core i3 / Pentium / Celeron
AMD Socket AM4 / sTRX4*, TR4*(*Threadripper bracket not included)
AMD Ryzen 7 / Ryzen 5 / Ryzen 3 / Ryzen 9 / Threadripper
Block Dim.80 x 80 x 55 mm
Block MaterialCopper & Plastic
Radiator Size394.00 x 121.00 x 27.00 mm
Radiator MaterialAluminum
Fan Size3 Fan Slots (120 mm)
Fan Dim.120 x 120 x 26mm
Bearing TypeFluid Dynamic Bearing
Fan RPM500 - 2,000 + 300 RPM
Fan Air Flow18.28 - 73.11 CFM
Fan Noise21 - 36 dBA
Fan Connector4-pin PWM
ColorBlack
Tube Dim.Length: 400mm
Tube MaterialUltra-low Evaporation Rubber with Nylon Braided Sleeve
FeaturesDESIGN: With a re-designed cap and larger infinity mirror ring LED, the new Kraken X allows for adjusting the orientation of the pump head to fit without affecting the direction of the logo
BIGGER AND BRIGHTER: 10% bigger infinity mirror cap allows for more vivid RGB and a rotating cap accommodates re-orienting the logo no matter the direction the cooler is installed
BETTER CONTROL: Full CAM integration allows you to manage your Kraken’s performance with precision
INCREDIBLE PERFORMANCE: The Aer P radiator fans feature a chamfered intake and fluid dynamic bearing that provides silent
Přepravní hmotnost2.16 kg
Rozměry balení475 × 180 × 147 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 394 mm by 121 mm radiator fit my case front panel?

Measure the front panel clearance; the radiator is 394 mm long, 121 mm wide and 27 mm thick, and needs three 120 mm fan slots plus room for the 400 mm tubes to bend without kinking.

Which mounting bracket do I use for an LGA 1700 socket?

The kit includes brackets for LGA 1200, 115x, 2011, 2066 and AM4; for LGA 1700 you must request the separate bracket from the manufacturer before installation.

Do the Aer P120 fluid-dynamic-bearing fans need lubrication later?

No, the sealed fluid dynamic bearings are maintenance-free; only clean dust from the radiator fins and fan blades periodically to keep airflow at 18.28–73.11 CFM.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.