Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Transparent circular 200mm case fan with 2-pin connector

OEM Industries

OEM Industries A20030-10CB-2MN-C1 200mm 30mm 12V 0.40A 2 Pin CPU Cooler

SKU CH-0BTB-R91CW

A 200 mm case fan with a transparent frame, running on 12 V at 0.40 A through a 2-pin connector

  • ColorTransparent
  • TypeFan only
  • Power Connector2 Pin
  • Large 200 mm diameter moves more air at lower RPM
  • 30 mm thick frame fits standard 200 mm mounting holes
  • 12 V 0.40 A rating draws minimal power from the header
  • Two-pin connector provides simple voltage-controlled speed regulation
  • Transparent blades blend cleanly into any case aesthetic

200mm Transparent Fan for Case Airflow

This 200mm transparent case fan is designed for PC builders who need high-volume airflow through a single large opening. It operates on a 12V supply drawing 0.40A through a 2-pin power connector. The unit is a fan only, supplied without a heatsink or mounting brackets for CPU socket installation.

2-Pin Power Connector and No Included Accessories

The 2-pin connector provides basic power delivery without PWM speed control or tachometer feedback. No screws, adapters or controller software are bundled with the fan. Builders must supply their own mounting hardware and connect directly to a motherboard header or fan controller that accepts 2-pin devices.

200 by 30mm Frame Moves Air in Spacious Chassis

The 200 by 30mm frame suits cases with 200mm mounting points, delivering broad airflow coverage at 12V 0.40A. It fits full-tower and some mid-tower enclosures that support this form factor. Builders using smaller cases, liquid-cooling radiators or CPU socket coolers will find the dimensions incompatible.

Přednosti

  • Large 200 mm diameter moves more air at lower RPM
  • 30 mm thick frame fits standard 200 mm mounting holes
  • 12 V 0.40 A rating draws minimal power from the header
  • Two-pin connector provides simple voltage-controlled speed regulation
  • Transparent blades blend cleanly into any case aesthetic

Specifikace

ModelA20030-10CB-2MN-C1
ColorTransparent
TypeFan only
Power Connector2 Pin

Otázky k tomuto produktu

Will the sleeve bearing need replacement after extended use?

The sleeve bearing is not user-serviceable; plan to replace the entire fan if noise or vibration increases after long-term operation.

What limits continuous airflow at 12 V?

The 0.40 A current rating and fixed 2-pin supply set the maximum speed, so airflow cannot exceed the design point without voltage change.

How much heat and noise does the 200 mm frame produce running all day?

At 12 V the motor draws 0.40 A; the large diameter moves air quietly, and the plastic frame stays warm but not hot during sustained use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.