Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 55mm square fan 10mm thick four-pin connector

OEM Industries

OEM Industries MGT6012YR-W10 55mm 12V 0.30A 3500rpm 4-pin CPU cooler

SKU CH-246F-1VC2T MPN MGT6012YR-W10

A 55 mm ball-bearing fan with 4-pin PWM control spins at 3500 rpm from a 12 V 0.30 A supply

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Compact 55 mm frame fits tight GPU heatsinks
  • Ball bearing rated for long continuous operation
  • 3500 rpm delivers strong targeted airflow
  • 4-pin PWM connector enables precise speed control
  • Low 0.30 A draw minimises power load

Compact 55 mm replacement fan

The OEM Industries MGT6012YR-W10 is a 55 mm square fan designed as a direct drop-in for graphics-card coolers that use the same mounting pattern. It runs on 12 V at 0.30 A and spins at 3500 rpm to move air through tight heatsink fins.

Ball-bearing build with 4-pin control

Ball bearings give consistent rotation over long duty cycles without the wear patterns of sleeve designs. The 10 mm thickness and 43 x 32 x 39 mm screw-hole spacing match the original MAGIC cooler layout so no adapter brackets are needed. A 4-pin connector supplies PWM speed control and tachometer feedback to the GPU fan header.

Swaps a worn or noisy OEM blower

Install when the factory fan develops bearing rattle, drops below rated speed, or fails completely. The identical footprint and voltage restore stock cooling performance without modifying the shroud or BIOS fan curve. Not suited for builds that need a larger-frame fan, higher static pressure, or addressable lighting.

Přednosti

  • Compact 55 mm frame fits tight GPU heatsinks
  • Ball bearing rated for long continuous operation
  • 3500 rpm delivers strong targeted airflow
  • 4-pin PWM connector enables precise speed control
  • Low 0.30 A draw minimises power load

Specifikace

ModelMGT6012YR-W10
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Otázky k tomuto produktu

What does the 4-pin connector on the MGT6012YR-W10 allow the motherboard to control?

The 4-pin PWM connector lets the motherboard vary the fan speed up to 3500 rpm based on CPU temperature.

Will the 55 mm fan with 43x32x39 mm screw spacing fit my graphics card heatsink?

Measure the existing fan mounting holes; this unit needs a 43 mm by 32 mm by 39 mm rectangular pattern and 10 mm thickness.

How do I install the MGT6012YR-W10 without damaging the ball bearing?

Hold the fan by its frame, align the four screws with the 43x32x39 mm holes, and tighten evenly — do not press on the rotor hub.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.