Orico
Orico IG740PRO 2TB M.2 NVMe internal SSD
M.2 2280 NVMe drive with PCIe 4.0 speeds up to 7450 MB/s read and 1.5 million hours MTBF
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2280
- Capacity512GB/1TB/2TB/4TB/8TB
- InterfacePCI-Express 4.0 x4
- FeaturesORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100M
Style with Copper Heatsink
- With Heatsink
- Graphene Cooling
- with Copper Heatsink
Options 2TB-NVMe2.0 PCIe Gen4x4
- Industrial-grade reliability with MTBF exceeding 1.5 million hours
- Blazing PCIe 4.0 read speeds up to 7450 MB/s
- Advanced data security via power-loss protection and AES encryption
- Broad compatibility from industrial PCs to PS5 consoles
- High-quality TLC NAND with SLC dynamic caching for sustained performance
Industrial-grade 2TB NVMe SSD
The Orico IG740PRO is a 2TB internal solid-state drive built to an industrial-grade standard. It targets workloads that demand consistent uptime and data integrity in edge computing, AI inference, and big-data logging, while also serving personal PCs and PS5 consoles.
PCIe 4.0 x4 with 7450 MB/s read headroom
The drive runs on a PCIe 4.0 x4 link and NVMe 2.0 protocol, delivering up to 7450 MB/s sequential read and 1000K IOPS on the 1TB reference point. TLC NAND and SLC dynamic caching sustain high throughput until the cache fills, after which sustained writes settle at the native TLC rate.
M.2 2280 with integrated heatsink
The 2280 form factor fits standard M.2 slots in laptops, desktops, and the PS5 expansion bay. An innovative heatsink is included to manage thermals during prolonged heavy transfers, while power-loss protection, LDPC ECC, and AES encryption protect data without requiring extra host-side configuration.
Přednosti
- Industrial-grade reliability with MTBF exceeding 1.5 million hours
- Blazing PCIe 4.0 read speeds up to 7450 MB/s
- Advanced data security via power-loss protection and AES encryption
- Broad compatibility from industrial PCs to PS5 consoles
- High-quality TLC NAND with SLC dynamic caching for sustained performance
Specifikace
| Brand | ORICO |
|---|---|
| Series | ORICO-IG740PRO |
| Model | ORICO-IG740PRO |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 512GB/1TB/2TB/4TB/8TB |
| Interface | PCI-Express 4.0 x4 |
| Features | ORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100MB/s Read Speed, Advanced Data Security and Innovative Heatsink |
Další verze tohoto modelu
Dalších 5 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Orico
Orico O7000 1 TB PCIe 4.0 NVMe internal SSD with heatsink
- Internal Solid Stat…
- M.2 2280
153,99 US$
0.00194228BTC
Skladem
Orico
Orico ORICO-IG740PRO 1TB NVMe internal SSD with heatsink
- Internal Solid Stat…
- M.2 2280
159,99 US$
0.00201796BTC
Skladem
Orico
Orico e7400-4TB 4TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- M.2 2280
267,99 US$
0.00338017BTC
SklademOtázky k tomuto produktu
Will the PCIe 4.0 x4 interface run at full speed in my older PCIe 3.0 slot?
The drive uses PCIe 4.0 x4 and NVMe 2.0, so it will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 slot while remaining fully functional.
How can I verify the 7450 MB/s read speed is actually achieved after installation?
Run a sequential read benchmark such as CrystalDiskMark on an empty drive; the result should approach the rated 7450 MB/s figure under optimal thermal conditions.
Does the 2 TB IG740PRO include the innovative heatsink shown in photos, or must I buy one separately?
The drive ships with the innovative heatsink already attached; no additional cooling hardware is required for installation.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
