Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black M.2 2280 NVMe SSD with silver heatsink

Orico

Orico ORICO-IG740PRO 1TB NVMe internal SSD with heatsink

SKU CH-KB2M-J1JRH

1TB M.2 2280 NVMe drive with heatsink, PCIe 4.0 x4 interface, up to 7100 MB/s read speed, 1128K IOPS, 600 TBW endurance and 1.5 million hours MTBF

  • Device TypeInternal Solid State Drive (SSD)
  • Form FactorM.2 2280
  • Capacity512GB/1TB/2TB/4TB/8TB
  • InterfacePCI-Express 4.0 x4
  • FeaturesORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100M

Style with Copper Heatsink

Options 1TB-NVMe2.0 PCle Gen4x4

  • PCIe 4.0 x4 interface delivers up to 7100 MB/s read speed
  • 5 million hour MTBF provides industrial-grade reliability for critical workloads
  • AES encryption with power-loss protection safeguards data during unexpected shutdowns
  • 600 TBW endurance rating ensures long-lasting performance under heavy write loads
  • Integrated copper heatsink maintains optimal temperatures during sustained high-speed operation

Industrial-Grade NVMe SSD

The Orico ORICO-IG740PRO is a 1 TB internal solid-state drive built to an industrial specification with an MTBF of 1.5 million hours. It uses a PCIe 4.0 x4 interface and NVMe 2.0 to deliver sequential reads up to 7100 MB/s and 1128K IOPS for demanding workloads.

M.2 2280 Form Factor with Copper Heatsink

The drive fits the standard M.2 2280 slot and includes an integrated copper heatsink to manage thermal output during sustained transfers. Power-loss protection, LDPC ECC, AES encryption and a controlled BOM work together to preserve data integrity in critical applications.

Compatibility Checks Before Ordering

Verify that your motherboard or laptop provides an M.2 key-M slot wired for PCIe 4.0 x4 and that the firmware supports NVMe 2.0 boot if you plan to use it as a system drive. Confirm the physical clearance for the attached heatsink in compact chassis or expansion cards. The 600 TBW endurance rating suits heavy write workloads.

Přednosti

  • PCIe 4.0 x4 interface delivers up to 7100 MB/s read speed
  • 5 million hour MTBF provides industrial-grade reliability for critical workloads
  • AES encryption with power-loss protection safeguards data during unexpected shutdowns
  • 600 TBW endurance rating ensures long-lasting performance under heavy write loads
  • Integrated copper heatsink maintains optimal temperatures during sustained high-speed operation

Specifikace

BrandORICO
SeriesORICO-IG740PRO
ModelORICO-IG740PRO
Device TypeInternal Solid State Drive (SSD)
Form FactorM.2 2280
Capacity512GB/1TB/2TB/4TB/8TB
InterfacePCI-Express 4.0 x4
FeaturesORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100MB/s Read Speed, Advanced Data Security and Innovative Heatsink

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What practical throughput ceiling does the PCIe 4.0 x4 interface impose on this drive?

The PCIe 4.0 x4 link caps real-world throughput at the rated 7100 MB/s sequential read figure, so sustained transfers will not exceed that ceiling.

What physical slot and clearance does the M.2 2280 form factor with the included heatsink require?

It fits a standard M.2 2280 key-M slot, but the copper heatsink adds height, so verify your motherboard or laptop has enough vertical clearance above the socket.

How is the drive installed, and which step do builders most often skip?

Insert the drive at an angle into the M.2 slot, secure it with the motherboard screw, then peel the protective film off the heatsink thermal pad — skipping that film removal leaves the copper floating and defeats cooling.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.