Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 ECC Registered RDIMM 240-pin 1.35V memory upgrade

SKU CH-ZBVJ-YN4F3

16 GB DDR3L 1600 ECC registered RDIMM kit for Cisco UCS B260 M4 and B460 M4 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC Registered design protects data integrity in servers
  • DDR3L 1600 MHz CL11 speed handles demanding workloads
  • 35 V low voltage reduces power consumption
  • 2 x 8 GB kit expands compatible Cisco UCS B260 M4 and B460 M4 systems
  • 240-pin RDIMM form factor fits registered DIMM slots

ECC Registered DDR3L Kit for Cisco UCS Blades

This OWC kit supplies 16 GB of DDR3L 1600 ECC Registered memory as two 8 GB RDIMMs. The modules run at 1.35 V with CL11 latency and a 2Rx4 organisation. They are qualified for Cisco UCS B260 M4 E7 v2 and v3 plus B460 M4 E7 v2 and v3 blade servers.

For servers needing registered ECC — not

The RDIMMs are designed for workstation and server platforms that require registered ECC memory. They will not work in standard desktop computers and must not be mixed with unbuffered or load-reduced DIMMs. Buyers without a compatible Cisco UCS blade should look elsewhere.

240-pin DDR3L 1600 Registered form factor decides

Each stick uses the 240-pin DDR3L RDIMM form factor at 1600 MT/s. The registered buffer and ECC logic are mandatory for the target Cisco UCS B260 M4 and B460 M4 systems. If the server calls for a different pin count, voltage or buffer type, this kit will not install.

Přednosti

  • ECC Registered design protects data integrity in servers
  • DDR3L 1600 MHz CL11 speed handles demanding workloads
  • 35 V low voltage reduces power consumption
  • 2 x 8 GB kit expands compatible Cisco UCS B260 M4 and B460 M4 systems
  • 240-pin RDIMM form factor fits registered DIMM slots

Specifikace

BrandOWC
Part Number1R6T32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B260 M4 E7 v2 & v3
Cisco UCS B460 M4 E7 v2 & v3

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the registered ECC RDIMM modules need any firmware updates or periodic replacement?

No firmware updates are required; the modules are solid-state with no moving parts and are designed to last the life of the Cisco UCS B260 M4 or B460 M4 server.

What is the first limit reached when the kit runs at DDR3L 1600 continuously?

The CL11 CAS latency at 1600 MHz sets the timing boundary; sustained throughput cannot exceed the PC3L-12800 data rate.

How much heat and power does the 2Rx4 1.35 V kit produce under all-day load?

Each 8 GB module operates at 1.35 V without a heat spreader; total power draw stays within standard DDR3L limits for registered DIMMs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.