BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278824BTC
Skladem
OWC
OWC 16GB DDR4 2666 ECC UDIMM CL19 1.2V 2Rx8 Synology RS4017xs+ RS4021xs+
16 GB DDR4 2666 ECC UDIMM module for Synology RS4017xs+ and RS4021xs+ NAS
- Capacity16GB (1 x 16GB)
- Type288-Pin DDR4 ECC UDIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.2V
- ECCYes
- 16 GB capacity expands NAS memory for heavier workloads
- DDR4 2666 MHz CL19 timing keeps data flowing at rated speed
- ECC unbuffered design detects and corrects single-bit errors automatically
- 2 V operation lowers power draw and heat output
- Validated for Synology RS4017xs+ and RS4021xs+ systems
Compatible Synology RackStation upgrade
This 16GB DDR4 ECC UDIMM is validated for the Synology RS4017xs+ and RS4021xs+ platforms. It provides a single-module capacity increase for NAS, rackmount and NVR workloads that require error-correcting memory. The module follows the standard 288-pin unbuffered form factor. Builders needing non-ECC memory or a different pin count cannot use this part.
Thermals and power in normal operation
Operating at 1.2V, the module runs at the standard DDR4 voltage without a heat spreader. Passive cooling inside the chassis is sufficient for typical 2666MHz operation. Power draw scales with the 2Rx8 organisation and CL19 timing during sustained file-serving tasks. No active cooling or extra airflow is specified by the manufacturer.
What the compliance and support change
JEDEC and RoHS compliance make the upgrade warranty-safe for the target RackStation models. Backward compatibility with 2133MHz and 2400MHz systems allows the same module to work in slower slots. The supplier’s advanced replacement programme and limited lifetime warranty include free technical support for installation questions. No software utilities or additional accessories are bundled.
Přednosti
- 16 GB capacity expands NAS memory for heavier workloads
- DDR4 2666 MHz CL19 timing keeps data flowing at rated speed
- ECC unbuffered design detects and corrects single-bit errors automatically
- 2 V operation lowers power draw and heat output
- Validated for Synology RS4017xs+ and RS4021xs+ systems
Specifikace
| Brand | OWC |
|---|---|
| Part Number | 2E6D42R816GB |
| Capacity | 16GB (1 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS4017xs+ Synology RackstationRS4021xs+ |
Otázky k tomuto produktu
How do I install the 288-pin DDR4 2666 ECC UDIMM in my Synology RS4017xs+ and what step is often missed?
Power down the NAS, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then power on and verify the new 16GB appears in DSM — the step often missed is fully seating both clips so ECC initialisation succeeds.
What maintenance or replacement will this 16GB DDR4 2666 CL19 1.2V 2Rx8 module need later?
No scheduled maintenance is required; the module has no heat spreader and runs at 1.2V, so only replace it if a memory test reports correctable ECC errors rising above threshold or if you need more than 16GB per slot.
What limit appears first when the RS4021xs+ runs sustained workloads with this PC4-21300 CL19 ECC UDIMM?
The memory controller caps operation at 2666 MT/s CL19; sustained heavy use will hit bandwidth and latency limits of the DDR4 2666 specification before thermal throttling occurs on the unbuffered 2Rx8 module.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
