Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

OWC

OWC 256GB (8x32GB) DDR3L 1866 CL13 4Rx4 ECC Registered RDIMM server RAM

SKU CH-7MA3-A0DC6

Eight-module kit provides 256 GB of DDR3L 1866 ECC registered memory for servers and workstations

  • Capacity256GB (8 x 32GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1866 (PC3L 14900)
  • CAS LatencyCL13
  • Voltage1.35V
  • ECCYes

Rank 4Rx4

  • ECC registered design protects data integrity in servers
  • 256 GB total capacity across eight 32 GB modules
  • DDR3L 1866 speed with CL13 latency for responsive performance
  • Low 1.35 V voltage reduces power draw and heat
  • JEDEC and RoHS compliant for broad workstation compatibility

256GB DDR3L ECC RDIMM Kit

This 256GB kit contains eight 32GB DDR3L 1866 registered DIMMs with ECC and a CL13 latency. It runs at 1.35V and uses the 240-pin form factor required by compatible workstations and servers. The modules are sold new and tested to meet JEDEC standards.

Suited for registered ECC platforms.

The memory is built for workstations, servers, NAS systems and routers that accept registered ECC RDIMMs. It will not work in standard desktop computers that require unbuffered non-ECC modules. Buyers needing unbuffered memory or a different voltage must choose another kit.

4Rx4 organisation drives capacity and compatibility

Each module uses a 4Rx4 rank configuration to reach 32GB density within the DDR3L 1866 specification. The motherboard must support 4Rx4 registered DIMMs at this speed and voltage. Verify the platform's qualified vendor list before purchase.

Přednosti

  • ECC registered design protects data integrity in servers
  • 256 GB total capacity across eight 32 GB modules
  • DDR3L 1866 speed with CL13 latency for responsive performance
  • Low 1.35 V voltage reduces power draw and heat
  • JEDEC and RoHS compliant for broad workstation compatibility

Specifikace

BrandOWC
Part Number1R8T34R4256K
Capacity256GB (8 x 32GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1866 (PC3L 14900)
CAS LatencyCL13
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What bandwidth does the DDR3L 1866 interface deliver at CL13?

The DDR3L 1866 (PC3L-14900) modules run at 1866 MT/s with a CAS latency of 13, providing a peak transfer rate of 14900 MB/s per module when the memory controller operates at the rated speed.

What physical slot and module dimensions are required for these 240-pin RDIMMs?

Each 32 GB module uses the standard 240-pin DDR3 DIMM form factor and fits a 240-pin DDR3 RDIMM slot; the kit contains eight modules, so eight free registered-DIMM slots are needed.

How do I install the eight modules and which population rule is often missed?

Power down the server, open the chassis, align each module's notch with the 240-pin RDIMM socket, press firmly until the latches click, then populate slots per the system manual's registered-DIMM population order — commonly installing modules in the wrong channel sequence prevents the system from recognising the full 256 GB.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.