Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black DDR4 UDIMM sticks, 16GB each, no heat spreader, gold contacts visible

OWC

OWC 2E6D42R8032P 32GB (2x16GB) DDR4 2666 ECC UDIMM

SKU CH-SYVH-T5A54

A 32 GB dual-channel DDR4 2666 ECC UDIMM kit with CL19 timing and 1.2 V operation for workstations, servers and NAS systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • ECC protection guards data integrity in servers and NAS
  • 32 GB dual-channel kit (2 × 16 GB) doubles bandwidth for multitasking
  • DDR4 2666 CL19 at 1.2 V delivers speed with low power draw
  • JEDEC-standard and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133 MHz and 2400 MHz systems

32GB DDR4 2666 ECC Kit for NAS and Workstations

This 32GB kit contains two 16GB unbuffered DDR4 2666 modules with ECC and a CL19 latency. It is designed for desktop PCs, workstations, servers and NAS systems that require error-correcting memory. The modules operate at the standard 1.2V JEDEC voltage.

Dual-channel 288-pin UDIMM fits standard desktop

The kit uses the 288-pin UDIMM form factor and installs in pairs to enable dual-channel operation on compatible motherboards. No heat spreader is fitted, keeping the module height low for tight clearances. Backward compatibility allows operation at 2133MHz and 2400MHz if the platform requires a lower speed.

Low-voltage ECC modules run cool and quiet

At 1.2V the modules draw minimal power and generate little heat during typical workloads. With no onboard LEDs or active cooling, the memory adds no audible noise to the system. ECC operation helps maintain data integrity without increasing thermal output.

Přednosti

  • ECC protection guards data integrity in servers and NAS
  • 32 GB dual-channel kit (2 × 16 GB) doubles bandwidth for multitasking
  • DDR4 2666 CL19 at 1.2 V delivers speed with low power draw
  • JEDEC-standard and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133 MHz and 2400 MHz systems

Specifikace

BrandOWC
Part Number2E6D42R8032P
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the CL19 latency limit throughput during long workloads?

CL19 is the rated CAS latency at DDR4 2666; sustained throughput depends on the memory controller and workload pattern rather than the module alone.

How much heat and power does the kit draw when running 24/7?

Each 16 GB module operates at 1.2 V with no heat spreader; total power scales with utilisation and the host platform's memory controller.

What must the system already support for this 288-pin ECC UDIMM kit to work?

A desktop, workstation, server or NAS board with DDR4 slots that accept 288-pin unbuffered ECC DIMMs at 2666, 2400 or 2133 MHz.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.