Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black DDR4 UDIMM sticks, 16GB each, no heat spreader, gold contacts visible

OWC

OWC 2E6D42R8032P 32GB (2x16GB) DDR4 2666 ECC UDIMM

SKU CH-SYVH-T5A54

A 32 GB dual-channel DDR4 2666 ECC UDIMM kit with CL19 timing and 1.2 V operation for workstations, servers and NAS systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • ECC protection guards data integrity in servers and NAS
  • 32 GB dual-channel kit (2 × 16 GB) doubles bandwidth for multitasking
  • DDR4 2666 CL19 at 1.2 V delivers speed with low power draw
  • JEDEC-standard and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133 MHz and 2400 MHz systems

32GB DDR4 2666 ECC Kit for NAS and Workstations

This 32GB kit contains two 16GB unbuffered DDR4 2666 modules with ECC and a CL19 latency. It is designed for desktop PCs, workstations, servers and NAS systems that require error-correcting memory. The modules operate at the standard 1.2V JEDEC voltage.

Dual-channel 288-pin UDIMM fits standard desktop

The kit uses the 288-pin UDIMM form factor and installs in pairs to enable dual-channel operation on compatible motherboards. No heat spreader is fitted, keeping the module height low for tight clearances. Backward compatibility allows operation at 2133MHz and 2400MHz if the platform requires a lower speed.

Low-voltage ECC modules run cool and quiet

At 1.2V the modules draw minimal power and generate little heat during typical workloads. With no onboard LEDs or active cooling, the memory adds no audible noise to the system. ECC operation helps maintain data integrity without increasing thermal output.

Pluspunten

  • ECC protection guards data integrity in servers and NAS
  • 32 GB dual-channel kit (2 × 16 GB) doubles bandwidth for multitasking
  • DDR4 2666 CL19 at 1.2 V delivers speed with low power draw
  • JEDEC-standard and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133 MHz and 2400 MHz systems

Specificaties

BrandOWC
Part Number2E6D42R8032P
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the CL19 latency limit throughput during long workloads?

CL19 is the rated CAS latency at DDR4 2666; sustained throughput depends on the memory controller and workload pattern rather than the module alone.

How much heat and power does the kit draw when running 24/7?

Each 16 GB module operates at 1.2 V with no heat spreader; total power scales with utilisation and the host platform's memory controller.

What must the system already support for this 288-pin ECC UDIMM kit to work?

A desktop, workstation, server or NAS board with DDR4 slots that accept 288-pin unbuffered ECC DIMMs at 2666, 2400 or 2133 MHz.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.