Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green 288-pin DDR5 RDIMM modules without heat spreaders

OWC

OWC 32GB (2x16GB) DDR5 5600 CL46 1Rx8 ECC Registered RDIMM

SKU CH-WVR6-14Z3C

32 GB dual-channel DDR5 5600 ECC registered RDIMM kit with CL46 latency and 1.1 V operation

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.1V
  • ECCYes

Capacity 32GB (2 x 16GB)

Zobrazit dalších 4 konfigurací

Rank 1Rx8

  • ECC registered design protects data integrity in servers
  • 32 GB dual-channel kit expands memory capacity efficiently
  • DDR5 5600 speed delivers high bandwidth for workloads
  • 1 V operation reduces power draw per module
  • JEDEC standard compliance ensures broad platform compatibility

ECC Registered DDR5 Kit

This 32 GB kit contains two 16 GB DDR5 5600 modules built to JEDEC PC5-44800 CL46 specifications. Registered ECC design targets workstations and servers that require error correction and signal buffering. It will not function in standard desktop platforms or alongside unbuffered or load-reduced DIMMs.

1Rx8 Capacity and Headroom

Dual-rank 1Rx8 organisation delivers 32 GB across two channels, letting memory-intensive workloads scale within registered memory limits. CL46 latency at 5600 MT/s provides stable throughput for virtualisation and database tasks, while the 1.1 V operating voltage keeps power draw predictable. Workloads exceeding 32 GB per channel will require additional registered DIMM slots.

288-Pin Registered Build Fit

Modules use the standard 288-pin DDR5 RDIMM form factor and require a motherboard with registered ECC support and dual-channel architecture. No heat spreader is fitted, so airflow in the memory zone must be managed by the chassis. Mixing with unbuffered or load-reduced memory is not supported, so all populated slots must match this registered specification.

Přednosti

  • ECC registered design protects data integrity in servers
  • 32 GB dual-channel kit expands memory capacity efficiently
  • DDR5 5600 speed delivers high bandwidth for workloads
  • 1 V operation reduces power draw per module
  • JEDEC standard compliance ensures broad platform compatibility

Specifikace

BrandOWC
Part Number5R6D51R8032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this DDR5 5600 ECC registered kit run alongside existing DDR5 4800 registered modules in my server?

Mixing different DDR5 speeds forces the system to run all memory at the lowest common speed, so 5600 modules will downclock to match 4800 modules if they share a channel.

How can I confirm the kit is operating at 5600 MT/s with CL46 after installation?

Check the memory speed and timings in the BIOS/UEFI setup or use a system-information tool such as CPU-Z to verify DDR5 5600 and CL46 are reported.

Does the 32 GB dual-channel kit include a heat spreader or any extra accessories?

The kit contains only the two 16 GB 288-pin DDR5 5600 CL46 1Rx8 ECC registered RDIMM modules; no heat spreader or additional accessories are included.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.