Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green low-profile DDR4 memory module with black chips and gold contacts

OWC

OWC 32GB DDR4 2666 CL19 2Rx8 VLP ECC Unbuffered DIMM 288-pin 1.2V memory upgrade

SKU CH-D0YH-TFVVM

A 32GB DDR4 2666 ECC UDIMM module built for Supermicro SuperBlade 4119MG-X and X11SCE-F motherboards

  • Capacity32GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity lets you run more applications simultaneously
  • DDR4 2666 speed with CL19 latency delivers responsive data access
  • ECC protection detects and corrects memory errors automatically
  • VLP 288-pin form factor fits dense Supermicro SuperBlade systems
  • JEDEC-standard 1.2 V unbuffered design ensures broad compatibility

System-Specific DDR4 Upgrade

This 32GB DDR4 2666 module is built for Supermicro SuperBlade 4119MG-X and listed X11 motherboards. It targets administrators who need ECC protection in a very-low-profile form factor. The single DIMM delivers 32GB of unbuffered memory at 1.2V.

JEDEC Standard Limits

The module follows JEDEC DDR4 2666 PC4-21300 specifications with CL19 latency and 2Rx8 organisation. Maximum throughput is defined by the 2666 MT/s rating; the platform cannot exceed this speed. ECC function operates only on motherboards that support unbuffered ECC DIMMs.

2Rx8 Rank Configuration

The dual-rank 2Rx8 layout is the specification that determines compatibility with the target Supermicro boards. Systems requiring single-rank modules or registered DIMMs will not accept this part. Verify the motherboard qualification list before purchase.

Přednosti

  • 32 GB capacity lets you run more applications simultaneously
  • DDR4 2666 speed with CL19 latency delivers responsive data access
  • ECC protection detects and corrects memory errors automatically
  • VLP 288-pin form factor fits dense Supermicro SuperBlade systems
  • JEDEC-standard 1.2 V unbuffered design ensures broad compatibility

Specifikace

BrandOWC
Part Number2E6V42R832GB
Capacity32GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 4119MG-X
Supermicro Motherboard X11SCE-F
Supermicro Motherboard X11SCL-LN4F
Supermicro Motherboard X11SCM-F
Supermicro Motherboard X11SCM-LN8F

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 32 GB module or add smaller DIMMs to reach the same total?

The module is a single 32 GB DDR4 2666 CL19 2Rx8 VLP ECC unbuffered DIMM; matching capacity, speed, rank and voltage across all slots gives the most stable operation.

What does the 2666 MT/s rating deliver in a Supermicro X11SCM-F or SuperBlade 4119MG-X?

The memory runs at the JEDEC-standard 2666 MT/s with CL19 latency at 1.2 V, providing the rated throughput for those platforms without overclocking.

How does the 288-pin DDR4 2666 interface limit performance in these systems?

The 288-pin DDR4 2666 interface operates at the standard 2666 MT/s data rate; actual throughput depends on the memory controller and channel population of the specific Supermicro board.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.