暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green low-profile DDR4 memory module with black chips and gold contacts

OWC

OWC 32GB DDR4 2666 CL19 2Rx8 VLP ECC Unbuffered DIMM 288-pin 1.2V memory upgrade

SKU CH-D0YH-TFVVM

A 32GB DDR4 2666 ECC UDIMM module built for Supermicro SuperBlade 4119MG-X and X11SCE-F motherboards

  • Capacity32GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity lets you run more applications simultaneously
  • DDR4 2666 speed with CL19 latency delivers responsive data access
  • ECC protection detects and corrects memory errors automatically
  • VLP 288-pin form factor fits dense Supermicro SuperBlade systems
  • JEDEC-standard 1.2 V unbuffered design ensures broad compatibility

System-Specific DDR4 Upgrade

This 32GB DDR4 2666 module is built for Supermicro SuperBlade 4119MG-X and listed X11 motherboards. It targets administrators who need ECC protection in a very-low-profile form factor. The single DIMM delivers 32GB of unbuffered memory at 1.2V.

JEDEC Standard Limits

The module follows JEDEC DDR4 2666 PC4-21300 specifications with CL19 latency and 2Rx8 organisation. Maximum throughput is defined by the 2666 MT/s rating; the platform cannot exceed this speed. ECC function operates only on motherboards that support unbuffered ECC DIMMs.

2Rx8 Rank Configuration

The dual-rank 2Rx8 layout is the specification that determines compatibility with the target Supermicro boards. Systems requiring single-rank modules or registered DIMMs will not accept this part. Verify the motherboard qualification list before purchase.

特長

  • 32 GB capacity lets you run more applications simultaneously
  • DDR4 2666 speed with CL19 latency delivers responsive data access
  • ECC protection detects and corrects memory errors automatically
  • VLP 288-pin form factor fits dense Supermicro SuperBlade systems
  • JEDEC-standard 1.2 V unbuffered design ensures broad compatibility

仕様

BrandOWC
Part Number2E6V42R832GB
Capacity32GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 4119MG-X
Supermicro Motherboard X11SCE-F
Supermicro Motherboard X11SCL-LN4F
Supermicro Motherboard X11SCM-F
Supermicro Motherboard X11SCM-LN8F

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I pick the 32 GB module or add smaller DIMMs to reach the same total?

The module is a single 32 GB DDR4 2666 CL19 2Rx8 VLP ECC unbuffered DIMM; matching capacity, speed, rank and voltage across all slots gives the most stable operation.

What does the 2666 MT/s rating deliver in a Supermicro X11SCM-F or SuperBlade 4119MG-X?

The memory runs at the JEDEC-standard 2666 MT/s with CL19 latency at 1.2 V, providing the rated throughput for those platforms without overclocking.

How does the 288-pin DDR4 2666 interface limit performance in these systems?

The 288-pin DDR4 2666 interface operates at the standard 2666 MT/s data rate; actual throughput depends on the memory controller and channel population of the specific Supermicro board.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。