Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3 RDIMM sticks, no heat spreader, gold contacts, 240-pin

OWC

OWC 64GB (2x32GB) DDR3 1333 PC3-10600 CL9 4Rx4 240-pin 1.5V ECC Registered RDIMM server RAM

SKU CH-8R62-GXN79

A 64 GB dual-channel kit of two 32 GB DDR3 ECC registered DIMMs running at 1333 MHz with CL9 latency for compatible servers and workstations

  • Capacity64GB (2 x 32GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 64GB (2 x 32GB)

Rank 4Rx4

  • 64 GB capacity in a dual-channel kit
  • ECC registered design detects and corrects data errors
  • DDR3 1333 speed rated at PC3-10600
  • 240-pin RDIMM form factor fits server slots
  • 5 V JEDEC-standard voltage for broad compatibility

Server DDR3 ECC RDIMM Kit

This OWC kit provides 64GB of registered ECC memory in a dual-channel pair of 32GB modules. It is built for workstations and servers that require DDR3 1333 registered DIMMs with error correction. Standard desktop computers cannot use this memory type.

Installation Constraints

Modules install into 240-pin DDR3 slots like any DIMM, but the system must support registered ECC memory and 4Rx4 organisation. Mixing these sticks with unbuffered or non-ECC DIMMs will prevent the system from booting. All populated slots should use identical capacity, speed and rank configuration.

Pre-Order Verification

Confirm that your motherboard or server platform explicitly lists support for DDR3 1333 registered ECC RDIMMs at 1.5V. Verify the maximum supported capacity per slot and the total number of ranks the memory controller can address. Check whether the firmware requires matched pairs for dual-channel operation.

Přednosti

  • 64 GB capacity in a dual-channel kit
  • ECC registered design detects and corrects data errors
  • DDR3 1333 speed rated at PC3-10600
  • 240-pin RDIMM form factor fits server slots
  • 5 V JEDEC-standard voltage for broad compatibility

Specifikace

BrandOWC
Part Number1R3D34R4064P
Capacity64GB (2 x 32GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How can I confirm the 64GB DDR3 1333 kit is running at CL9 after installation?

Enter the system BIOS or use a tool like CPU-Z to verify the memory operates at DDR3 1333 (PC3-10600) with CL9 timings and 1.5V voltage.

What is included in the box and do I need to buy anything else to install it?

The box contains two 32GB 240-pin DDR3 ECC Registered RDIMM modules. No extra parts are required if your server or workstation has free DDR3 RDIMM slots.

Should I choose this 64GB dual-channel kit or a different capacity for my server?

Select this 64GB (2 x 32GB) kit when your platform supports 4Rx4 Registered ECC DDR3 1333 and you need maximum capacity per channel.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.