Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Phanteks

Phanteks PH-F120D30_DRGB_PWM_BK01 120mm 30mm DRGB case fan 3-pack

SKU CH-AV4N-2D297 MPN PH-F120D30_DRGB_PWM_BK01

Three 120 mm case fans with 30 mm thick frames, 64.3 CFM airflow and addressable DRGB lighting linked by daisy-chain connectors

  • Fan Counts3 Fans
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness30mm

Fan Size 120mm

Style Regular

Model D30

Option Single Fan

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 30 mm thick frame delivers 3.01 mmH2O static pressure for radiators and restrictive filters
  • 32 addressable D-RGB LEDs illuminate blades and frame, syncing via 3-pin JST daisy-chain
  • PWM speed range 250 to 2000 RPM balances 64.3 CFM airflow with 30.2 dB(A) noise
  • Corner clips and bridge connectors link three fans into one tidy unit with minimal cables
  • Reverse airflow variant available so lighting stays visible in push or pull orientation

Three-pack 120mm 30mm DRGB case fans

This set contains three 120mm case fans with a 30mm thick frame and addressable DRGB lighting. Each fan spins between 250 and 2000 RPM and delivers up to 64.3 CFM of airflow at 30.2 dB(A). The 4-pin PWM connector allows motherboard speed control while a 3-pin JST daisy-chain link handles the lighting.

Builders who need thick fans for radiators

The 30mm depth produces 3.01 mmH₂O of static pressure, making the fans suitable for liquid-cooling radiators or cases with dense mesh. Buyers who only have clearance for standard 25mm fans or who prefer fans that ship with a dedicated RGB controller should consider other options.

30mm frame thickness decides fit

At 30mm thick these fans occupy more space than typical 25mm models, so case and radiator clearance must be verified before purchase. The daisy-chain bridge clips and corner clips let the three units run as a single lighting zone from one motherboard 3-pin DRGB header.

Přednosti

  • 30 mm thick frame delivers 3.01 mmH2O static pressure for radiators and restrictive filters
  • 32 addressable D-RGB LEDs illuminate blades and frame, syncing via 3-pin JST daisy-chain
  • PWM speed range 250 to 2000 RPM balances 64.3 CFM airflow with 30.2 dB(A) noise
  • Corner clips and bridge connectors link three fans into one tidy unit with minimal cables
  • Reverse airflow variant available so lighting stays visible in push or pull orientation

Specifikace

BrandPhanteks
ModelPH-F120D30_DRGB_PWM_BK01
Part NumberD30-120
Fan Counts3 Fans
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness30mm
RPM250~2000+10%RPM
Air Flow64.3 CFM
Noise Level30.2dB(A)
Power Connector4 Pin
ColorBlack
LEDDRGB
Přepravní hmotnost0.36 kg
Rozměry balení198 × 124 × 33 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How loud is the D30-120 at its 2000 RPM maximum speed?

The noise level is rated at 30.2 dB(A) when the fan runs at full speed.

What motherboard headers are required to run the three fans and their lighting?

Each fan needs a 4-pin PWM header for power and a 5 V 3-pin JST header for D-RGB control.

Will the 30 mm thickness and 3.01 mmH₂O pressure fit my older 120 mm radiator?

Yes, the 30 mm frame and 3.01 mmH₂O static pressure are designed for restrictive radiators and mesh.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.