Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four black rectangular LED modules for NV7 case frame

Phanteks

Phanteks PH-PLEDKT_NV7_DBK01 NV7 Premium D-RGB Kit Black case accessory

SKU CH-5D62-1BRRP MPN PH-PLEDKT_NV7_DBK01

Adds four magnetic D-RGB LED modules to the NV7 chassis outer frame for addressable lighting effects

  • TypesLighting & Decor
  • ColorsBlack
  • SpecificationsChassis Support: For Phanteks NV7 Chassis Materials: ABS Pla
  • FeaturesThe NV7 Premium D-RGB Kit is designed specifically for NV7 c

Model NV7 Premium Black Kit

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Designed specifically for the NV7 chassis
  • Four D-RGB LED modules create mesmerising lighting effects
  • LED modules magnetically secure around the outer frame
  • Plug-and-play connection via standard JST connector
  • Compatible with third-party software control

Designed for NV7 chassis

The Phanteks NV7 Premium D-RGB Kit is a case accessory built exclusively for the NV7 chassis. It adds addressable lighting through four LED modules that attach to the outer frame. The kit suits builders who want integrated illumination without separate strips or cables. It is not for owners of other cases or anyone needing internal component lighting.

Magnetic mounting on outer frame

Four D-RGB LED modules secure magnetically around the NV7 outer frame for a fixed, alignment-free fit. The modules use a standard JST connector and draw power through the case D-RGB controller rated at 7A. No other mounting method or connector type is supported.

Plug-and-play with NV7 controller

The kit connects directly to the NV7 D-RGB case controller for immediate operation. An extra D-RGB power hub port allows further lighting expansion if desired. Compatibility with third-party ARGB software is maintained through the motherboard header. The assembly measures 150.9 x 80 x 16.4mm and uses ABS and PC plastics in a black finish.

Přednosti

  • Designed specifically for the NV7 chassis
  • Four D-RGB LED modules create mesmerising lighting effects
  • LED modules magnetically secure around the outer frame
  • Plug-and-play connection via standard JST connector
  • Compatible with third-party software control

Specifikace

BrandPhanteks
ModelPH-PLEDKT_NV7_DBK01
TypesLighting & Decor
ColorsBlack
SpecificationsChassis Support: For Phanteks NV7 Chassis
Materials: ABS Plastic, PC Plastic
D-RGB Controller Output: 7A
Product Dimension: 150.9 x 80 x 16.4mm / 5.94 x 3.14 x 0.64in
FeaturesThe NV7 Premium D-RGB Kit is designed specifically for NV7 chassis. Elevate your NV7 chassis with mesmerizing lighting effects with the included 4x D-RGB LED modules that securely mount on the outer frame of the NV7. Effortlessly connect to the NV7 D-RGB case controller.
Přepravní hmotnost1.16 kg
Rozměry balení622 × 289 × 36 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How does the 7 A D-RGB controller output affect the lighting in my NV7?

The 7 A output lets the included four LED modules run at full brightness without voltage drop along the outer frame.

What does the standard JST connector mean for hooking this kit up?

It plugs directly into the NV7 D-RGB case controller or the extra D-RGB power hub for plug-and-play operation.

Will the 150.9 x 80 x 16.4 mm modules fit my NV7 outer frame?

Yes, each module is sized to magnetically snap onto the NV7 outer frame with no brackets or tools required.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.