Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Pimoroni Maker Essentials kit with two mini breadboards and assorted jumper wires

Pimoroni

Pimoroni PIM245 Maker Essentials Kit with 2 Breadboards and Jumper Jerky

SKU CH-DKJ6-1KQYE

Two mini breadboards and sixty Jumper Jerky cables connect components to a Raspberry Pi or Arduino for prototyping

  • Two mini breadboards hold LEDs and chips for prototyping
  • 10 short socket-to-socket jumper wires link components directly
  • 10 short pin-to-socket jumper wires bridge boards and headers
  • 10 long pin-to-pin jumper wires span wider layouts
  • Compatible with Raspberry Pi and Arduino for flexible projects

What the Kit Contains

The Pimoroni PIM245 Maker Essentials Kit includes two mini breadboards and seventy Jumper Jerky wires. These parts let you build temporary circuits with LEDs, chips and other components without soldering.

Who This Suits

Beginners and hobbyists who want a ready assortment of short and long jumpers for quick breadboard experiments will find everything in one box. Builders who need high-current wires, insulated leads or a larger breadboard area should look elsewhere.

Key Specification

The pack provides ten pieces of each jumper type: short socket-to-socket, short pin-to-socket, short pin-to-pin, long socket-to-socket, long pin-to-socket and long pin-to-pin.

Přednosti

  • Two mini breadboards hold LEDs and chips for prototyping
  • 10 short socket-to-socket jumper wires link components directly
  • 10 short pin-to-socket jumper wires bridge boards and headers
  • 10 long pin-to-pin jumper wires span wider layouts
  • Compatible with Raspberry Pi and Arduino for flexible projects

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

Will the mini breadboards in the PIM245 kit fit alongside an existing Raspberry Pi or Arduino board I already use?

The two mini breadboards are sized for simple circuits and components such as LEDs and chips, and the included jumper wires connect directly to Raspberry Pi or Arduino headers.

How can I verify the jumper wires are making good contact after I plug them into the breadboards and my board?

Check that each wire seats firmly in the breadboard tie-points and the header pins on your Raspberry Pi or Arduino, then run a simple blink sketch to confirm signal continuity.

What exactly comes in the PIM245 box and do I need to buy any extra cables or boards?

The kit contains two mini breadboards, ten short socket-to-socket, ten short pin-to-socket, ten short pin-to-pin, ten long socket-to-socket, ten long pin-to-socket and ten long pin-to-pin jumper wires; no additional cables or boards are included.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.