暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Pimoroni Maker Essentials kit with two mini breadboards and assorted jumper wires

Pimoroni

Pimoroni PIM245 Maker Essentials Kit with 2 Breadboards and Jumper Jerky

SKU CH-DKJ6-1KQYE

Two mini breadboards and sixty Jumper Jerky cables connect components to a Raspberry Pi or Arduino for prototyping

  • Two mini breadboards hold LEDs and chips for prototyping
  • 10 short socket-to-socket jumper wires link components directly
  • 10 short pin-to-socket jumper wires bridge boards and headers
  • 10 long pin-to-pin jumper wires span wider layouts
  • Compatible with Raspberry Pi and Arduino for flexible projects

What the Kit Contains

The Pimoroni PIM245 Maker Essentials Kit includes two mini breadboards and seventy Jumper Jerky wires. These parts let you build temporary circuits with LEDs, chips and other components without soldering.

Who This Suits

Beginners and hobbyists who want a ready assortment of short and long jumpers for quick breadboard experiments will find everything in one box. Builders who need high-current wires, insulated leads or a larger breadboard area should look elsewhere.

Key Specification

The pack provides ten pieces of each jumper type: short socket-to-socket, short pin-to-socket, short pin-to-pin, long socket-to-socket, long pin-to-socket and long pin-to-pin.

特長

  • Two mini breadboards hold LEDs and chips for prototyping
  • 10 short socket-to-socket jumper wires link components directly
  • 10 short pin-to-socket jumper wires bridge boards and headers
  • 10 long pin-to-pin jumper wires span wider layouts
  • Compatible with Raspberry Pi and Arduino for flexible projects

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the mini breadboards in the PIM245 kit fit alongside an existing Raspberry Pi or Arduino board I already use?

The two mini breadboards are sized for simple circuits and components such as LEDs and chips, and the included jumper wires connect directly to Raspberry Pi or Arduino headers.

How can I verify the jumper wires are making good contact after I plug them into the breadboards and my board?

Check that each wire seats firmly in the breadboard tie-points and the header pins on your Raspberry Pi or Arduino, then run a simple blink sketch to confirm signal continuity.

What exactly comes in the PIM245 box and do I need to buy any extra cables or boards?

The kit contains two mini breadboards, ten short socket-to-socket, ten short pin-to-socket, ten short pin-to-pin, ten long socket-to-socket, ten long pin-to-socket and ten long pin-to-pin jumper wires; no additional cables or boards are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。