NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Replace Power
A 220 W Flex ATX power supply with a 24-pin motherboard connector, a 4-pin connector and two Sata connectors for HP Pavilion Slimline systems
This proprietary Flex ATX unit delivers 220 W of continuous power for HP Pavilion Slimline s5-1024lat desktops and compatible slimline chassis. It replaces the original Bestec FH-ZD221MGR and HP 633195-001 parts with a direct-fit grey housing. Builders restoring or upgrading these specific small-form-factor systems will find the correct connector layout and voltage switching built in.
The 220 W maximum output defines the practical limit for any graphics card or drive upgrades inside the host chassis. Input voltage auto-ranges between 115 V and 230 V, so the unit works worldwide without a manual switch. Only components that fit within this power envelope and the proprietary form factor can be supported; higher-wattage or standard ATX units will not mount or connect.
A 24-pin motherboard connector, a 4-pin CPU connector and two Sata power leads cover the typical Slimline peripheral set. The proprietary shell aligns with the original mounting points, so no adapter brackets or cable extensions are required. Grey finish matches the OEM aesthetic, and the 1 kg weight keeps stress on the chassis rails low during transport or vibration.
| Brand | Replace Power |
|---|---|
| Color | Grey |
| Type | Proprietary Power Supply |
| Weight | 1 |
The 220W model replaces HP part 633195-001 and Bestec FH-ZD221MGR, supplying a 24-pin motherboard connector, a 4-pin connector and two Sata connectors for that chassis.
It provides up to 220 W total output across the 24-pin, 4-pin and two Sata rails, powering the motherboard, CPU and two Sata drives within the proprietary Flex ATX form factor.
The unit accepts both 115 V and 230 V mains, so it works worldwide without a voltage selector switch; the proprietary Flex ATX shape and connector set determine physical compatibility.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?