Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black ATX mid-tower with mesh front, tempered glass side panel and four pre-installed PWM fans visible

Rosewill

Rosewill RWGC1 ATX Mid Tower PC Case, Tempered Glass, 4 PWM Fans

SKU CH-ZDZA-80ZV5 MPN RWGC1

ATX mid-tower case with mesh front panel, tempered glass side, four pre-installed 120mm PWM fans, and support for 360mm front radiators

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialABS / SPCC / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX

Option 4 x PWM Fans - GC1

  • 4 x PWM Fans - GC1
  • 4 x PWM Fans - GC2
  • Compact -Black / 3x ARGB Fans
  • Compact -Black / 4x ARGB Fans
  • Compact-White
  • Max Airflow-Black
  • Curved Glass-support BTF-Black

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Mesh front panel and four pre-installed PWM fans deliver strong intake airflow
  • Full-size tempered glass side panel shows internal components with tool-free access
  • Supports graphics cards up to 340 mm and CPU coolers up to 160 mm for high-end builds
  • Front radiator support up to 360 mm enables custom liquid-cooling configurations
  • Seven expansion slots and multiple drive bays provide flexible upgrade room

ATX Mid Tower with Mesh Front

The Rosewill RWGC1 is an ATX mid tower case built for system builders who want strong airflow out of the box. A mesh front panel feeds three pre-installed 120mm PWM fans at the front and one at the rear, giving immediate intake and exhaust. The side panel is a full tempered glass window with tool-free access. It supports ATX, Micro ATX and Mini ITX motherboards and fits a power supply mounted at the bottom.

Upgrade from Cases with Poor Front Intake

This chassis replaces enclosures that rely on solid front panels or a single intake fan. The mesh front combined with four PWM fans moves a larger volume of air without raising noise, so the jump is worth it when your current build runs warm under load or when you plan a front-mounted radiator. Support for a front radiator up to 360mm and a rear radiator up to 120mm adds liquid-cooling flexibility that many older mid towers lack.

Check GPU Length and CPU Cooler Height

Before ordering, verify that your graphics card measures 340mm or less and your CPU cooler stands 160mm or shorter. The power supply cavity accepts units up to 160mm deep. Drive planning uses two 3.5in bays that can also hold one 2.5in plus one 3.5in drive, plus two dedicated 2.5in trays. Front I/O provides one USB 3.0, two USB 2.0, HD audio and a reset button.

Přednosti

  • Mesh front panel and four pre-installed PWM fans deliver strong intake airflow
  • Full-size tempered glass side panel shows internal components with tool-free access
  • Supports graphics cards up to 340 mm and CPU coolers up to 160 mm for high-end builds
  • Front radiator support up to 360 mm enables custom liquid-cooling configurations
  • Seven expansion slots and multiple drive bays provide flexible upgrade room

Specifikace

BrandRosewill
ModelRWGC1
TypeATX Mid Tower
ColorBlack
Case MaterialABS / SPCC / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Side PanelTempered Glass Panel
Internal 3.5" Drive Bays2 x 3.5" or 1 x 2.5" + 1 x 3.5" (HDD Cage)
Internal 2.5" Drive Bays2
Expansion Slots7
Front Ports1 x USB 3.0, 2 x USB 2.0, 1 x HD Audio, 1 x Reset
Fan OptionsTop: 2 x 120mm
Front: 3 x 120mm, 2 x 140mm
Rear: 1 x 120mm
Pre-installed FansFront: 3 x 120mm PWM Fan
Rear: 1 x 120mm PWM Fan
Radiator OptionsFront - Up to 360mm / Rear - Up to 120mm
Max GPU Length340 mm
Max CPU Cooler Height160 mm
Max PSU Length160 mm
Dimensions17.8" x 7.7" x 15.5"
Weight13.9 lbs.
Přepravní hmotnost5.63 kg
Rozměry balení508 × 483 × 279 mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What clearance does the RWGC1 allow for a graphics card and CPU cooler?

The case fits graphics cards up to 340 mm long and CPU coolers up to 160 mm tall.

How are the four pre-installed 120 mm PWM fans connected, and what step do builders often miss?

Each fan has a 4-pin PWM connector that must be plugged into a motherboard fan header or a PWM hub; the common mistake is leaving one header unplugged so that fan runs at full speed.

When should the dust filters on the front mesh and bottom PSU intake be cleaned?

Clean the magnetic front filter and the slide-out bottom filter every few months, or whenever visible dust builds up, to keep airflow through the four 120 mm PWM fans unrestricted.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.