Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

sakose

sakose 12025-LED 120 mm case fan 15 LED 1100 RPM 18 dBA 2 pack

SKU CH-TYBV-VD8E3 MPN 12025-LED

Two 120 mm hydraulic-bearing case fans with 15 white LEDs each, running at 1100 RPM and 18 dBA

  • ColorWhite
  • LEDWhite

Color White

LED White

Option 2 Fans, No Controller

  • Two-fan pack gives balanced airflow for standard 120 mm mounts
  • Hydraulic bearing runs at 1100 RPM with only 18 dBA noise
  • Fifteen white LEDs create bright illumination inside the case
  • Anti-vibration rubber pads reduce vibration transferred to the chassis
  • Curved blade design and cut-back frame boost air volume and pressure

Two-Pack White LED Case Fans

This twin pack supplies two 120 mm hydraulic-bearing fans for builders who want coordinated white lighting inside a standard chassis. Each unit runs at 1100 RPM while producing 18 dBA, so a pair can move air through a radiator or case vent without adding noticeable noise. The 12 VDC Molex 4-pin connectors plug directly into a power supply, and anti-vibration rubber pads are included to reduce transmitted vibration.

15 LEDs Per Fan for Uniform White Glow

Every fan carries 15 white LEDs embedded in the frame, creating a consistent glow visible from multiple angles. The LED count and colour are fixed, so the lighting effect cannot be changed or synchronised with addressable RGB headers. Buyers who want per-LED colour control or software-driven patterns will need a different lighting solution.

Anti-Vibration Pads and Molex Power Included

The box provides rubber pads for each corner of both fans, damping vibration against the chassis or radiator. Power is delivered through standard Molex 4-pin plugs, so no motherboard fan headers are required. No PWM cable, fan controller or RGB adapter is supplied, limiting speed adjustment to voltage-based controllers or BIOS voltage offset.

Přednosti

  • Two-fan pack gives balanced airflow for standard 120 mm mounts
  • Hydraulic bearing runs at 1100 RPM with only 18 dBA noise
  • Fifteen white LEDs create bright illumination inside the case
  • Anti-vibration rubber pads reduce vibration transferred to the chassis
  • Curved blade design and cut-back frame boost air volume and pressure

Specifikace

BrandSakose
ColorWhite
LEDWhite

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How loud is 18 dBA when the fan is running inside a case?

At 18 dBA the fan is very quiet; in a typical build it will be barely audible over other components.

What does the Molex 4‑pin connector limit for speed control?

The 4‑pin Molex connection supplies fixed 12 V power, so the fan runs at its rated 1100 RPM without PWM or voltage regulation.

Will the 120 mm frame and included anti‑vibration pads fit standard case mounts?

Yes, the 120 mm square frame matches standard mounting holes and the supplied rubber pads install between fan and chassis to reduce vibration.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.