نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two white 120 mm case fans with 15 white LEDs each, hydraulic bearing, anti-vibration rubber pads, Molex 4-pin connectors

sakose

sakose 12025-LED 120 mm case fan 15 LED 1100 RPM 18 dBA 2 pack

SKU CH-TYBV-VD8E3 MPN 12025-LED

Two 120 mm hydraulic-bearing case fans with 15 white LEDs each, running at 1100 RPM and 18 dBA

  • ColorWhite
  • LEDWhite

Color White

LED White

Option 2 Fans, No Controller

  • Two-fan pack gives balanced airflow for standard 120 mm mounts
  • Hydraulic bearing runs at 1100 RPM with only 18 dBA noise
  • Fifteen white LEDs create bright illumination inside the case
  • Anti-vibration rubber pads reduce vibration transferred to the chassis
  • Curved blade design and cut-back frame boost air volume and pressure

Two-Pack White LED Case Fans

This twin pack supplies two 120 mm hydraulic-bearing fans for builders who want coordinated white lighting inside a standard chassis. Each unit runs at 1100 RPM while producing 18 dBA, so a pair can move air through a radiator or case vent without adding noticeable noise. The 12 VDC Molex 4-pin connectors plug directly into a power supply, and anti-vibration rubber pads are included to reduce transmitted vibration.

15 LEDs Per Fan for Uniform White Glow

Every fan carries 15 white LEDs embedded in the frame, creating a consistent glow visible from multiple angles. The LED count and colour are fixed, so the lighting effect cannot be changed or synchronised with addressable RGB headers. Buyers who want per-LED colour control or software-driven patterns will need a different lighting solution.

Anti-Vibration Pads and Molex Power Included

The box provides rubber pads for each corner of both fans, damping vibration against the chassis or radiator. Power is delivered through standard Molex 4-pin plugs, so no motherboard fan headers are required. No PWM cable, fan controller or RGB adapter is supplied, limiting speed adjustment to voltage-based controllers or BIOS voltage offset.

أبرز المميزات

  • Two-fan pack gives balanced airflow for standard 120 mm mounts
  • Hydraulic bearing runs at 1100 RPM with only 18 dBA noise
  • Fifteen white LEDs create bright illumination inside the case
  • Anti-vibration rubber pads reduce vibration transferred to the chassis
  • Curved blade design and cut-back frame boost air volume and pressure

المواصفات

BrandSakose
ColorWhite
LEDWhite

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How loud is 18 dBA when the fan is running inside a case?

At 18 dBA the fan is very quiet; in a typical build it will be barely audible over other components.

What does the Molex 4‑pin connector limit for speed control?

The 4‑pin Molex connection supplies fixed 12 V power, so the fan runs at its rated 1100 RPM without PWM or voltage regulation.

Will the 120 mm frame and included anti‑vibration pads fit standard case mounts?

Yes, the 120 mm square frame matches standard mounting holes and the supplied rubber pads install between fan and chassis to reduce vibration.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.